Product overview
- Part Number
- GBM2804H-100T Gimbal Motor
- Manufacturer
- iFlight
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
Model: GBM2804H-100T
Motor Out Diameter: Ф35±0.05mm
Configuration: 12N/14P
Motor Height: 15±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф7-0.008/-0.012 mm
Hollow Shaft(ID): Ф5+0.05/+0 mm
Wire Length: 300±3mm
Cable AWG: #28
Motor Weight: 39±0.2g
Wire plug: N/A
No-load current: 0.07±0.05 A
No-load volts: 10 V
No-load Rpm: 1468~1622 RPM
Load current: 0.8A
Load volts: 10 V
Load torque(g·cm): 250-350
Motor internal resistance: 10Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 1mA @2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 2-3S
Working temperature: -20~60℃;10~90%RH
1 x GBM2804H-100T
Detailed Information
The GBM2804H-100T motor by iPower Motors are the ultimate brushless gimbal motor for GoPro Cameras.This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear – 0.5-1KG/cm Torque.The principle of the camera stabilization using brushless direct drive motors In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
