DJI air unit sold separately – Note some soldering may be required as GepRC’s most recent stock includes their non DJI FC and  BEC to power the air unit. These units do not include an FC to Air unit cable.

MARK4 HD5 is newly designed DJI FPV HD Quadcopter.DJI has redefined the drone racing industry with the new Digital FPV System. It delivers lower latency rates within 28 ms, a 4km maximum transmission range, stunning HD 720p/120fps resolution, and, most importantly, an unforgettable FPV flying experience.

This is the 6S version with 1800kV motors.  If you prefer 4S, we also sell a 4S Mark4 HD5

DJI FPV Air unit is optional in case you already have one that you want to transfer to this quad.

Features

• No Propellers in the view.
• Perfect for DJI FPV HD
• Full 3K Carbon Fiber
• 720p 120fps FPV
• System:SPAN-F7-BT-HD
• Build-In: BlueTooth wireless adapter
• Black Box: 32Mb onboard flash memory.
• Full Soft Mounted FC System: Provides a clean operating environment for gyro.
• Exquisite Assembly Process: Eliminate any potential installation problems.
• Weight:400g without battery

Specifications

• Brand Name: Geprc
• Model: Mark4 HD5
• Item Name: 224mm F7 OSD 5 Inch FPV Racing Drone
• Drone Version: PNP ( Without Receiver, Battery)
• Optional Version:  6S 1800KV
• Weight: 401g ( WIth DJI HD Air unit, Without Battery)

Includes

• • 1x GepRC Mark4 HD5 drone
  • DJI FPV Air Unit(Optional)
  • 4x 5043 Props
  • Battery strap

Still Required

• R/C Transmitter
• DJI FPV Goggles
• 1100-1500 6S Lipo (at least 60C)

Flight controller system specs

F722 DUAL ICM20689 FLIGHT CONTROLLER:

• MCU: STM32F722RET6
• IMU: 2x ICM20689(SPI)
• Build-In: BlueTooth wireless adapter (SpeedyBee APP)
• BlackBox: 32Mb onboard Flash
• OSD: BetaFlight OSD w/ AT7456E chip
• Baro:BMP280
• BEC Output: 5V@2A / 9V@2A
• Integrated LC Filter
• Firmware target: EXF722DUAL
• Size: 36x36mm board, φ4mm with Grommets φ3mm
• Power input: 3-6S LiPo
• 5x UART
• 8x Motor outputs

BLHELI_32 50A ESC 4IN1:

• MCU: STM32FO51K86(32bit 48mHz)
• Continuous Current: 50A
• Peak Current: 55A (5S)
• Current sensor: YES
• Telemetry：Supported
• Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
• Firmware Version:GEPRC-BL32-4IN1
• Input Voltage: 3-6S Lipo