GEPRC STABLE 20A Toothpick Stack AIO - GEPRC

Product overview

Part Number: GEPRC STABLE 20A Toothpick Stack AIO

Manufacturer: GEPRC

Product Category: STACK, CONTROLLER AND ESC

Update Date: 2024-05-20

Detailed Information

A new high-performance AIO brushless FC, GEP-20A-F4 is added to the NEW members of the toothpick FPV Micro Quad’s

Compared with the previous 12A version of GEP-20A-F4, the new GEP-20A-F4 can achieve 20A continuous current and burst current can reach 30A. Supports up to 4S batteries. It is recommended to use 12XX-15xx motors with 3 “- 4” propeller. This GEP-20A-F4 has powerful flight performance, comes with OSD tuning, extremely light weight, allowing you to build a toothpick FPV Micro Quad’s with perfection performance.

Coupled with a 200mW map transmission specifically designed for Whoop classes and toothpick racks, it has stable signals, clean graphics, and light weight.Easy to use.

GEP-20A-F4 Flight contorller:

Specifications:

Model Name:GEP-12A-F4
MCU: STM32F411
IMU: MPU6000 gyro/accelerometer (SPI)
FC Firmware target: GEPRCF411
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
Current Monitoring : Support
Betaflight OSD : Support
External Buzzer : Support
LED : Support
USB Port: MicroUSB
BEC Output: 5V@1A
Integrated LC Filter
ESC MCU: BB21F16G
Continuous current: 20A
Peak current: 30A
Input:2-4s lipo
Supports Dshot600 ,Oneshot,Multishot
Current meter: 210
Target: G_H_30
Size: 32x32mm board,26.5mm mounting holes (M2)
Installing Hole: 26.5×26.5mm, M2

VTX Specifications:

Model Name:GEP-VTX200-Whoop
Item name: 25~200mw 48CH VTX FPV Transmitter
Output power: Pit/25/100/200mw switchable
Channels: 48CH
Input voltage: 4.5V – 5.3V
Current consumption: 300mA(type)
Antenna: RG178 antenna U.FL interface
Frequency: 5.8GHz 5 bands 48 channels With Raceband
Video Format:PAL/NTSC
Control protocol：IRC Tramp
Weight: 2g without antenna

Receiver Support:

Frsky XM/XM+/R-XSR
Futaba Receiver
DSM/DSMX
FlySky Receive
TBS Crossfire Receiver
AC900
Most receivers that support SBUS

Include：

– 1 x GEP-20A-F4
– 1 x GEP-VTX200-Whoop
– 1 x Power cable
– 8 x screw
– 4 x Soft silicone

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...

You May Also Be Interested In

Nazgul F5 Tri-blade Prop Nazgul R5 V2 Tri-blade Prop Nazgul T3020 Bi-blade Prop Nazgul T4030 Bi-blade Prop Defender 16 Prop Set Defender 20 Prop Set Ethix P4 Candy Cane 5.1×4×3 Prop HQ 3.5x2.5x3 Tri-blade Prop HQ 4x3x3 Tri-blade Prop HQ 9X4X3 Tri-blades Prop GEMFAN 1050 Macroquad Prop HQ 31mmx31mm Shaft Prop Nazgul Cine 3535 Tri-blade Prop HQ DT51MMX4GR Prop - 3sets Gemfan 35MM Tri-blade Prop Gemfan 45MM Tri-blade Prop HQ 8x4x3 Prop HQProp 89MM x 8 Cinewhoop Prop GEMFAN 5.1X3.6X3 Tri-blade Prop GEMFAN 6032-3 Tri-blade Prop