Product overview
- Part Number
- CRSF to 6x PWM converter
- Manufacturer
- Matek
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Detailed Information
Matek Konvertor can turn a receiver with CRSF protocol into a receiver with 6 PWM outputs for servos. This will be especially appreciated by pilots of classic aircraft models without a FC. So they can use their favorite ELRS or Crossfire Nano receiver. The receiver is connected to the board via UART - pins TX1 and RX1. In addition to converting the CRSF signal to PWM, the board can also send telemetry data. On the board there is a VBat pin for the battery voltage sensor, a Curr pin for connecting an external current sensor, and RX2 and TX2 pins for connecting the GPS module.
The converter is fully adjustable. Settings are possible via UART2 using Matek Configurator. It is possible to set failsafe, trims, PWM output frequency or calibrate the current/voltage sensor.
The VBat pin is only for monitoring the battery voltage, not for powering the board. The board must be powered by 5V - perhaps from the BEC on the regulator.
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
