Product overview
- Part Number
- QS8-S connector (1 pair)
- Manufacturer
- Rotorama
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Detailed Information
QS8-S connector with gold-plated connectors for large and powerful drones. The QS8-S is suitable for applications where the "classic" XT90 is not enough. The connector can be permanently loaded with 110A and peak load up to 500A. The connector is in antispark design, where the connection is done first through an integrated 5.1Ohm resistor, through which the capacitors on the ESCs are charged with a controlled current. This prevents unwanted sparking during wiring, which damages the connector and increases the transient resistance. The connector includes a cable cover, so there is no need to insulate the solder joints with a soldering iron.
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC – 20×20
Flycolor Trinx G5 60A 4-in-1 BLHeli_32 ESC – 30×30
SKYRC S100neo AC100W/DC200WDual Channel Lipo Charger
VIFLY ToothStor – 4 Port 2S Balance Charger with Storage Mode
Foxeer Echo 2 Max 13dBi 5.8G/2.4G Dual Frequency High Gain Directional FPV Antenna
Foxeer Echo 2 5.8G 9dBi Patch Feeder Antenna
Flywoo Explorer LR 4 HD DJI O3
Kakute F722 Flight Controller
Atlatl HV V2 VTX – 1.2GHz 1W
TheFPV Build It Kit – 5 Inch (Analogue / ELRS)
EMAX ES08MD II 13g Mini Metal Digital Servo
TheFPV Build It Kit – 5 Inch (Walksnail HD / ELRS)
TheFPV Build It Kit – 5 Inch (DJI O3 HD / ELRS)
IFlight Analog Protek 25 (crispy) [Defective]
Happymodel Mobula7 HD Spare Parts [Defective]
Emax BabyHawk R Pro BNF (lightly fried) [Defective]
Walksnail Avatar HD VTX V2 Module [Defective]
BetaFPV ELRS Nano TX V2 Module
FrSky RX8R Pro 2.4Ghz Receiver EU LBT
NeutronRC 30×30, 25×25, 20×20 adapter board.