Product overview
- Part Number
- Happymodel Moblite7 Walksnail 1s 75mm Brushless HD Whoop V3 (ELRS V3.0)
- Manufacturer
- Happymodel
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
Tired of drones that handle like a potato in a windstorm? The Moblite7 Walksnail V3 is as nimble as a cat on a hot tin roof. It’s so lightweight, even helium balloons are having an identity crisis. Elevate your FPV game.Please note that GNB A30 connectors are interchangeable with BT2.0 connectors, so you can use either connect with this whoop.
Detailed Information
You’re out there, with your drone fleet that flies like a snail coated in molasses, thinking, “Could FPV get any more lackluster?” You’re in need of a turbo-boost, something that’ll light your FPV skies ablaze!
Why Settle for Less When You Can Soar?
Let’s not mince words; if your current FPV drone was a cup of tea, it would be tepid water with a bag of mediocrity steeped in it. Forget “good enough” and unleash the adrenaline-pumping thrill you’ve been longing for.
Unveiling the Happymodel Moblite7 Walksnail V3 – Your Ticket to FPV Supremacy!
Top Product Highlights
- Unbeatable Weight: At 34.5g (sans battery), this feathery beast is designed for outrageous agility.
- UART ELRS v3.0 Ready: Say goodbye to latency. The future is now, and it’s lightning-fast.
- GNB A30 & BT2.0 Plug-in Play: Plug in and ascend. As easy as a piece of space cake!
- Built-in Blackbox: Record your epic flights and learn from your “less than epic” ones.
- HD Camera: Because if you’re going to do it, do it in 1080P, baby!
Specifications
Brand Name: Happymodel
Model: Moblite7 Walksnail V3
Frame wheelbase: 75mm
Weight: 34.5 gram without battery
Size: 98mm*98mm*48mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30
Onboard blackbox ready
| Flight controller SuperX HD ELRS | Betaflight 4.4.2 firmware ready Firmware target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: BMI270 or ICM42688P (SPI connection) Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update Bluejay ESC Firmware ready Built-in 5V 1A BEC Built-in voltage detection No betaflight analog osd chip |
| Onboard 4in1 ESC | Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support ESC-Configurator and BLHELI_S Suite configurator Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz Default protocol: DSHOT300 |
| Onboard UART ExpressLRS 2.4GHz Receiver | RF Frequency: 2.4GHz Antenna: enameled copper wire 31mm length Telemetry output Power: <12dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 The same hardware with Happymodel EP1 receiver Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through |
| Motor | Model: 1002 20000KV Configu-ration:9N12P Stator Diameter:10mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm Weight(g):2.5g No.of Cells(Lipo):1S only |
| Propeller Gemfan 1610-2 Bi-blades | Weight:0.24g Material: PC Pitch:1 inch Props Dia:40mm Center Hole Dia:1.5mm |
| VTX | Model: Avatar mini 1s module Communication Frequency: 5.725-5.850 GHz Transmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBm l/o Interface: JST1.O*6(Power in)JST1.O*4(USB) Mounting Holes: 25.5*25.5 mm Dimensions: 33*33*6.5 mm Storage: 8G Recording: 1080p/720p Weight: 6.8 g Operating Temperature: -20-40℃ Channels: 8 Wide Power lnput: 3.1V-5V Supported FC System: Betaflight OSD: Canvas mode Bitrate: 25mbps / 50mbps Latency: Average delay 22ms Antenna connector: IPEX |
| Camera | Model: Avatar nano lmage Sensor: 1/2.7”Inch Resolution: 1080P/6Ofps,720P/120fps,72OP/6Ofps Ratio: 16/9 4/3 Lens: 2.1mm FOV 170° Aperture: F2.0 Shutter: Rolling shutter Min.Illumination: 0.001Lux Weight: 3.5g Dimensions: 14*14*17mm Coaxial Cable: 45mm |
Default factory dump file:
Moblite7 Walksnail 1S 75mm digital HD brushless whoop v3 dump file
How to Bind Moblite7 Walksnail ELRS
Molibte7 walksnail Digital HD Whoop V3.0 version bind procedure.mp4 – Google Drive
Included
- 1x Moblite7 Walksnail V3 Drone
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
BrainFPV Radix Flight Controller
TheFPV – The Motor. 2208 (1650Kv, 2150Kv, 2400Kv)
Loco Positioning Node – Indoor Positioning Device
Loco Positioning Deck – Indoor Positioning Tag
FlightOne MillivoltOSD Flight Controller
DoomedFPV V2 5″ Freestyle Quadcopter Frame
Happymodel 300mAh 3S HV 11.4V Micro Battery for Mobula7 HD
FlightOne RevoltOSD Flight Controller
Sticky Crappy Battery Strap
TheFPV Source – Analog FPV Freestyle Quadcopter Kit
Tattu R-Line 3.0 2000mAh 14.8V 120C 4S1P Lipo Battery Pack
Tattu R-Line 3.0 1800mAh 14.8V 120C 4S1P Lipo Battery Pack with XT60
Tattu R-Line 3.0 1300mAh 14.8V 120C 4S1P Lipo Battery Pack with XT60 Plug
Tattu R-Line 3.0 1550mAh 14.8V 120C 4S1P Lipo Battery Pack with XT60 Plug
RunCam Micro Swift 3 V2 (M8 Lens)
SkyRC 15V 4A 60W AC Power Adaptor
SkyRC S65 AC Balance Charger/Discharger
TeenyF4 Pro Flytower F4 1-2S, 5A, 16x16mm
FuriousFPV True D X Reciever Module (for Fatshark Dominators)
TBS Unify Evo VTX