Frsky S8R 16CH 3-Axis Stabilisation Receiver With Smart Port - Frsky

Product overview

Part Number: Frsky S8R 16CH 3-Axis Stabilisation Receiver With Smart Port

Manufacturer: Frsky

Product Category: OTHER PARTS

Update Date: 2024-05-20

Detailed Information

This is the S8R receiver from FrSky with in-built 3-axis stabilisation. This receiver is designed for fixed wing models and will support stabilisation, automatic leveling, hovering and knife-edge flight modes. For Delta Wings, flying wings and V-tail models, the S8R supports stabilisation and automatic level flight modes. In order to edit the type of model and manipulate these features, you will need to use the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X-series receiver.

Tip: You can use the S8R as a slave receiver with the RB-10 to give you that extra time to bring your model home.

Key Features:

Built-in 3-axis stabilisation for fixed wing and gliders
Built-in three-axis gyroscope and three-axis accelerometer sensor module
Built-in RSSI PWM output (0~3.3V)
Built-in battery voltage detection
Smart Port enabled

Specifications:

S8R (8CH/16CH receiver with built-in 3-axis gyro and 3-axis acceleration)
Size: 46.47×26.78×14.12mm (L x W x H)
Weight: 14g
Number of Channels: 16CH (1-8ch from conventional channel output, 1-16ch from SBUS port)
With RSSI PWM output on board: PWM voltage output (0~3.3V), 100HZ, 1500±500us
Operating Voltage Range: 4.0~10V
Operating Range: full range
Gyroscope Measurement Range ±2000dps
Accelerometer Measurement Range: ±4g
Firmware Upgradeable
Compability: Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode
S8R-EU only works with Frsky Horus X12S and Taranis X9D Plus/X9E/X7/XJT in D16-EU mode.
EU version

Resources:

For more information, check out the S8R manual.

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...