Caddx Turtle V2 HD FPV Camera - Caddx

Product overview

Part Number: Caddx Turtle V2 HD FPV Camera

Manufacturer: Caddx

Product Category: ACTION CAMERAS

Update Date: 2024-05-20

Description

All in one FPV camera with HD recording

Detailed Information

The Caddx Turtle V2 camera is a new take on the popular runcam split FPV camera. Just like the split, this is both an HD and FPV camera built into one. Just like the runcam split,, the turtles has a main PCB and a separate camera. But the caddx turtles has the ability to stack the camera and PCB’s together to form an integrated camera which is helpful on builds that do not have much space in the stack.

Whats new in V2

New Turbo Eye lens
Refined PCB layout with 20x20mm mounting holes – no offset hole!
Microphone
Wrapped cable
Default image setting an bit-rate improvements

New: Convert your Turtle into a GoPro Session style camera using the turtle case

If you would like to have the flexibility to use your turtles camera with a number of gopro session mounts/enclosures on multiple quadcopters be sure to check out the turtle case

Caddx turtle v2 2

Specification

Image sensor: 1/2.7″ CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL,changeable
Video Resolution: 1080P@60fps / 720@60fps
Power Input: DC 4-20V
FPV FOV : 155°
Recording FOV :170°
Mini Illumination: 0.01lux
Image Resolution: 2 Megapixels
Lens: Full Size Turbo Eye Lens
Working Current: 400mA@5V/190mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MOV
ELectronic shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
Real-time Audio Output: Yes
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 64GB(need Class 6 or above,recommend Class 10/UHS-I/UHS-II)
Dimension: SD Slot Module 28*29mm / Camera 19*19mm (installed with 20*20mm, expand to 30*30mm )
Working Temperature: -20℃~+60℃
Net weight: 12g(more or less)

Quick Guide

1. RIGHT BUTTON: Press the RIGHT button for 3s-5s to activate video recording, in the meanwhile the light on the lower right corner will flicker.

2. LEFT BUTTON: Press the LEFT button for 3s-5s to stop video recording.

3. DOWN BUTTON: Press the DOWN button for 3s-5s to switch the resolution, 720P with Blue LED on, 1080P with Red LED on, the default mode is 1080P.

4. MIDDLE BUTTON: The MIDDLE button is the menu button.

Notice: The camera need at least 8G Class 10 SD card.

Notes: If the power is cut accidentally when video recording, please power on again, then the camera will automatically restore the memory,

and the video records before power cut will be still saved in TF card.

Kit Contents

1 x Caddx Turtles Camera
1 x 5D-OSD Menu Board
1 x 4pin FPV Silicon Cable (extend into a 2pin joint for OSD board and a 3pin joint for FPV)
1 x Screw Set
1 x Adapter Board
1 x Manual

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...