Matek F722 Wing Flight Controller - Matek Systems

Product overview

Part Number: Matek F722 Wing Flight Controller

Manufacturer: Matek Systems

Product Category: STACK, CONTROLLER AND ESC

Update Date: 2024-05-20

Description

The Matek F722 Wing takes everything you loved about the F405, but takes it to the next level with an F7 MCU

Detailed Information

The Matek F722 Wing takes everything you loved about the F405, but beefs up the processor to give you extra processing power to crank up the PID loop speed. The F722 packs in all the sensors you need for fixed wing flight as well as offering high spec BECs to power everything on your drone.

Matek f722 wing info 3

Specifications

MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
5x Uarts (1,2,3,4,6) with built-in inversion
1x Softserial-Tx
2x Motors, 6x Servos outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Switchable Dual Camera Inputs
Switchable 5V/9V for Camera/VTX
High-precision Current Sense
TR/SA VTX control: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Analog Airspeed sensor: Yes
Digital Airspeed sensor: Yes

Firmware Support

INAV Flight/BetaFlight
Target: MATEKF722SE
Arduplane support comming soon

Kit Contents

1x Matek F722 Wing Flight Controller
3x header Pin rows (no soldered on)

Manual

Matek-F722-Wing-Manual

F722-WING VS F405/F411-WING

	F722-WING	F405-WING	F411-WING
MCU	216MHz STM32F722	168MHz STM32F405	100MHz STM32F411
IMU	MP6000	MP6000	MP6000
BARO	BMP280	BMP280	BMP280
OSD	AT7456E	AT7456E	AT7456E
BlackBox	MicroSD	MicroSD	/
Firmware	INAV BetaFlight	INAV ArduPilot	INAV BetaFlight
Dual Camera In	Yes	/	/
5V/9V Switcher	Yes	/	/
Current Sense	High precision 132A	104A	78A
Max.Voltage	36V(8S)	30V(6S)	30V(6S)
Motors	2	2	2
Servos	6	7	5
UART	5	6	2
Softserial	1	1	1
Uart Inversion	All	RX2	RX1
5V for FC	2A	2A	2A
9V for VTX	2A	2A	/
Vx for Servos	5A	5A	3A
LDO 3.3V	200mA	500mA	200mA
Size	54×36	56×36	41×28
Weight	25g	25g	12g

Matek f722 wing info 2 Matek f722 wing info 4

PDB

Input voltage range: 9~36V (3~6S LiPo) w/TVS protection
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100)
Current Senor: 132A, 3.3V ADC, Scale 250

BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A

BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad

BEC Vx output

Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.6A
Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

BEC 3.3V output

Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 200mA

Physical

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 54 x 36 x 13 mm
Weight: 25g

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...