Product overview
- Part Number
- Pagoda-2 MMCX Omnidirectional Antenna
- Manufacturer
- ChaosFPV
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
A pagoda 2 antenna with MMCX connector, available in RHCP or LHCP configurations.
Detailed Information
This is the Pagoda antenna, designed by Maarten Baert, now with an MMCX connector to easily connect with your VTX. When designing these antenna, Maarten had a few key features that he wanted to make sure were present in his antenna. These were:
- Good omnidirectional radiation pattern.
- Good axial ratio.
- Reasonably small.
- Easy to manufacture within fine tolerances at low cost, even for a hobbyist.
And guess what? He succeeded! The Pagoda antenna offers every hobbyist all of the above at a very reasonable price.
For more detail, check out our guide on why the Pagoda-2 antenna is so good.
Specifications:
- Center frequency: 5.8 GHz
- Bandwidth: 500 MHz (5.55 – 6.05 GHz)
- Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency)
- Axial ratio: < 1.3
- Radiation efficiency: 95%
- Polarisation: RHCP or LHCP
- Weight: 4g
- Size: 72mm x 22.5mm (60mm COAX)
- Connector: MMCX (crimp shield + heat shrink)
- Works great with the Chaos VTX
Pack Includes:
- 1 x Pagoda-2 Antenna MMCX
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Wheel Hub for FTX Vantage / Carnage / Outlaw (4 pcs)
10 x 2mm Pins for FTX Vantage / Carnage / Outlaw / Banzai (6 pcs)
FTX Tracer Wheel Lock Screws Set (8pc)
FTX Tracer Front & Rear Driveshafts
FTX Outlaw Front to Centre Driveshaft
FTX Outback 2.0 Rear Driveshaft (2pc)
FTX Carnage/ Outlaw Hinge Pins (Long & Short) 2 Sets
FTX Carnage/ Outlaw Replacement Front Bumper
Camera Holder for Mobeetle6 (3D Printed)
Carbon Fibre Frame for Mobeetle6
UDIRC Tyres B (UD1601-005B)
UDIRC Tyres A (UD1601-005A)
Shendrones 3D Printed Frame Parts for SWOL X8
Replacement Frame Cetus w/ Canopy
Replacement Flight Controller for Cetus (Brushed)
Replacement Frame Cetus Pro w/ Canopy
Spare 5 Inch Y Arm for TBS Podracer (set of 2)
HEE Wing F-01 VTX Case (Analog/Digital)
FTX 17g Steering Servo (Outback Ranger XC)
BetaFPV Nano Gimbal for LiteRadio Transmitter