Product overview
- Part Number
- Kakute F7 Mini V3
- Manufacturer
- HolyBro
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
Everything you love from the Kakute F7, now in a 20x20mm mounting size board. Now with a smaller footprint and a connector for your DJI Air unit / Caddx VistaNote: The DJI air unit works with a Lipo no bigger than 4S.
Detailed Information
The Holybro Kakute F7 flight controller is a 20×20 board that makes it easy to build your multirotor. It integrates flight controller (FC) and onscreen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
HolyBro Kakute F7 Mini V3 Manual
New in V3
- MCU change from F745 to F722
- Added a connection for DJI Air Unit / Caddx Vista for digital FPV.
- Smaller footprint (still 20×20 mountable)
Specification
- MCU: STM32F722RET6 32-bit processor,216MHz, 256Kbytes RAM, 512Kbytes Flash
- IMU: MPU6000 (SPI)
- Barometer: BMP280
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 5hardware UARTS (UART1,2,3,4,6)
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
- Onbord 16Mbytes for Blackbox logging
- 5V Power Out: 1.0A max
- 3.3V Power Out: 0.2A max
- Dimensions: 30x30mm
- Mounting Holes: Standard 20mm square to center of holes
- Weight: 4g
Includes
- FC board *1
- M3 Anti-Vibration Silicone Grommet Insert *4
- JST SH 8pin 150mm cable*1
- JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
- JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
- JST SH 6pin to GH 8pin 80mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
Looking for the older V2 Manual – Holybro_KakuteF7_Mini_V2_Manual
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Sparkfun Neo-M9N [Used]
Diatone FPV250 Ghost V4 Plastic Frame [New] (1pc random colour)
Mateksys FC H743 Wing [Used]
Genuine FTDI Adapter Cable [Used]
DroneCAN H-RTK F9P Helical
HolyBro DroneCAN F9P Rover RTK Module
HolyBro DroneCAN RM3100 Professional Grade Compass
HolyBro H-RTK UM982 Helical GPS
HolyBro DroneCAN M9N GPS Module
Replacement Screw Set for ZMO PRO
ZMO PRO Replacement Fuselage Cable Set
Insta360 Go Mount for Crux 3 [New]
Happymodel Moblite7 Flysky [Defective]
SingularXYZ Sfaira One GNSS RTK Rover
Hex Here4 Multiband RTK GNSS (integrated autopilot)
HerePro without iStand
Seeedstudio sensecap sticker sheet [New]
SenseCAP Indicator D1Pro
LD Robot LD19 D300 TOF Lidar 360° Omnidirectional 0-12m
Hook Up Silicone Wire Kit