RunCam Hybrid – Dual 4K HD & FPV Camera - RunCam

Product overview

Part Number: RunCam Hybrid – Dual 4K HD & FPV Camera

Manufacturer: RunCam

Product Category: ACTION CAMERAS

Update Date: 2024-05-20

Description

The runcam hybrid is a 2in1 FPV camera, record crisp 4K footagle onboard while sending a low latency FPV feed back to your goggles. Best of all the hybrid is just a single board design, making it much easier to fit into your quadcopter builds.

Detailed Information

The Hybrid is RunCam’s answer to the dual-camera system which has become more popular as of late. With RunCam quality pilots have come to know, the Hybrid is sure to please racers and freestylers alike. The Hybrid is equipped with a 145° wide-angle Sony 4K HD sensor as well as a RunCam Racer together on one camera. The singular 20×20 board saves space and installs easily on most frames.

Get amazing HD video footage as well as 6ms low-latency video at the same time with the RunCam Hybrid.

Features

4K HD & low-latency FPV camera in one
Wide-Angle 145° HD recording
Super low-latency (6ms) RunCam Racer FPV camera
Remote control HD recording
Simultaneous HD recording and FPV output
QR code parameter settings
Firmware upgradable through SpeedyBee app

Manual

RunCam_Hybrid_Manual_EN

Specifications

HD sensor	SONY 8MP
Analog sensor	SONY 1.3MP
Field of View (FOV)	HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
Video Resolution	4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
Video File Format	MP4
TV Mode	NTSC (720480)/PAL (720576) Switchable
Interface	HD supports UART remote control; FPV(Analog) supports UART firmware update.
Max Micro SD Card Supported	Up to 128G. U3 recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
Mounting Holes Distance	20*20mm
PCB Size	29*29mm
Lens Module Size	19*25mm
Lens Specs	HD Lens: M10	FPV Lens: M8
Power Input	DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with a battery will generate surges and burn the camera.)
Working Current	480mA @5V / 140mA @12V
Weight	18g

Includes

1x Camera
1x Plastic cover
1x 3pin 1.25 JST silicone cable (male)
1x 3pin 1.25 JST silicone cable (female)
1x Set of Screws
1x Manual

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...