JHE Supra F7 BT 20×20 Flight Controller (supports DJI FPV) - JHE

Product overview

Part Number: JHE Supra F7 BT 20×20 Flight Controller (supports DJI FPV)

Manufacturer: JHE

Product Category: STACK, CONTROLLER AND ESC

Update Date: 2024-05-20

Description

The latest design Supra F7BT mini Bluetooth, mini 20x20mm pitch F7 flight control, using STM32F722RET6 high-performance processor, MPU6000 gyroscope. It also supports Bluetooth wireless tuning.

Detailed Information

Integrated OSD, built-in 5V/2A (internal power supply, receiver, LED, BUZZER and other power supply), 9V/3A BEC (camera and image transmission mode power supply, its opening and closing can be controlled by USER2), two independent BEC work separately , Do not interfere with each other, optimized circuit design, high-performance hardware, to further ensure the powerful performance of flight control.

Rich and complete interface definition, 6-channel UART. In addition, the 8P 1.0MM socket is designed to facilitate the direct input of the plug line, connect with BLHELI 32-bit ESC, and support data return (RX1).

Integrated Bluetooth 4.0, support mobile phone APP Bluetooth wireless parameter adjustment, convenient for field optimization parameters, especially novices no longer worry about the driver.

Specification

Model: SupraF7BT
Main control chip: STM32F722RET6216MHz
Gyroscope: MPU6000 gyroscope (SPI)
Barometer: None
OSD chip: AT7456E
Black box: None
RGB LED support
BB sound: support
Input voltage: 2-6S
I2C interface: support
BEC-1: 5V/2A (internal power supply, receiver, LED, BUZZER, etc. power supply)
BEC-2: 9V/3A (camera and image transmission mode power supply, its opening and closing can be controlled by USER2, turn on the power when selected, the shipment is fully open by default, please configure the channel control switch by yourself)
Serial control port: six channels (UART1, UART2, UART3, UART4, UART5, UART6)
Bluetooth: support (port UART4, baud rate 115200, name Supra)
Flight control firmware: Betaflight
Goal: JHEF7DUAL.HEX
Conversion of hole position and shock-absorbing ball hole position: 20*20mm, φ3mm
Flight control size: 30*27mm
Weight: 8g

Included

1x F7 Flight Controller Board

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...