The Kopis CineWhoop 2.5″ is a small sub 250g quadcopter designed to carry a HD camera to capture smooth cinematic quality footage.  Build by Holybro, one of the best in the business this drone is based on a carbon frame with plastic prop guards, powered by Tmotor 1404 motors, and a Kakute F4 mini flight controller.

Please note that this version does not include the digital FPV system, we suggest you use either a Caddx Nebula Pro kit, or a Caddx Nebula Nano Kit.  Alternatively, if you fly Analog you can retrofit your own VTX/Camera with some creativity.

Features

• Frame:3mm 3k carbon fiber
• Flight Controller: Kakute F4 V2 Mini
• ESC: Tekko32 F3 4in1 35A mini ESC
• VTx:CaddxFPV Digital HD Camera Nebula Nano Kit
• Motor: F1404 KV3800
• Propeller: D63-5B
• Buzzer included.
• Battery plug: XT30
• Wheelbase: 105.5mm
• Weight:159g（Without Battery）
• Take-off Weight:250g (4s 850mah Lipo )
• Recommend battery (Not Included): 550~850mah 4s

Specifications

• MCU: STM32F405RGT6 32-bit processor
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 5 hardware UARTS (UART1,3,4, 5, 6)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
• 128 Mbit Dataflash chip for Blackbox logging

Manual

• Holybro Kopis cinewhoop2.5 Manual
• Kopis_Cinewhoop2.5_Factory_CLI_Dump

3D print files

If you don’t have your own 3D printer, we offer an affordable printing service here

• Kopis_Cinewhoop2.5“(CaddxVistaDigitalHDSystem)-3D_Print_STL_Files
• Kopis_Cinewhoop2.5“(CaddxNebulaPro&NanoKit)-3D_Print_STL_Files

We currently sell the version with the mount to fit the Caddx Nebula Pro and Nebula Nano cameras

Features

• Frame:4mm 3k carbon fiber
• Flight Controller: Kakute F7 mini V3
• ESC: Tekko32 F3 4in1 35A mini ESC
• 5.8G VTx: Atlatl HV Micro
• Motor: F1507 KV3800
• Propeller: T3140
• FPV camera: RunCam Racer Nano 2
• Adjustable camera uptilt from 10 degrees to 90 degrees
• Buzzer included.
• Battery plug: XT30
• Wheelbase: 137mm
• Weight:145g
• Recommend battery: 850mAh 4s

Specifications

• MCU: STM32F722RET6 32-bit processor
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 5hardware UARTS (UART1,2,3,4,6)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
• Onboard 16Mbytes for Blackbox logging

Includes:

• 1x Kopis cinewhoop2.5” FPV racing drone
• 1x Naked GoPro camera mount
• 4x D63-5B Propeller
• 2x Propeller guard
• 1x Carrying case

Package does not include Insta360 GO, the Insta360 GO on the pictures for reference only

Still Required

• R/C Transmitter / Receiver
• FPV System (camera and VTX)
• FPV Goggles
• 850mAh 4S Lipo (at least 60C)