The Mamba F722 DJI flight stack is one of the best F7 based 30×30 flight stacks you can get on the market if you are using the DJI digital FPV system.  With the 50A ESC this stack can power just about any freestyle quadcopter.   The flight controller includes a dedicated DJI HD connector along with a BEC to power the air unit.

Specifications

• Brand name: MAMBA
•  Item name: F722 DJI Stack

F722 DJI MK2 Flight Controller

• MCU: 216MHz STM32F722RET6
• Sensor: MPU6000
• Pneumometer: YES
• OSD: YES
• Black box: 16m Flash
• Number of serial ports: 6set
• Electric tuning procedure: DSHOT300 / 600/1200
• Electric tone back: YES
• Flying control status indicator: YES
• LED control switch: BF LED
• F.Port: Yes
• RSSI: NO
• Buzz: YES
• Input voltage: 3 ~ 6S Lipo (12.6 ~ 25.2V)
• TVS Power Protection: YES
• BEC: 3.3V 0.5A & 5V 2.5A & (DJI) 9V 2A
• Mounting hole position: 20mm, M2

  Mamba F50 Blheli_S Brushless ESC

• Input voltage: 3~6S Lipo (12.6V~25.2V)
• Rated current: 50A×4
• Peak current: 60A (10S)
• BEC: NO
• Program: Dshot: 300/600
• Firmware: BLHeli_S CH40
• TVS power protection: Yes
• Mounting hole: 30.5mm,M3

Includes

•  1 x  MAMBA DJI F722 MK2 Flight Controller
•  1 x  MAMBA F50_BLS Brushless ESC