Product overview
- Part Number
- SpeedyBee F7 V3 30×30 Flight Stack w/ 50A BLheli32 ESC
- Manufacturer
- SpeedyBee
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
SpeedyBee has stuffed everything you could ask for into thier V3 30×30 stack. it also includes all-new features that lets you flash firmware wirelessly from your phone. This also allows you to wirelessly access the blackbox logs and betaflight configurator to fine tune your drone to squeeze the most performance out of it.
Detailed Information
Features
- Smartest F722 FC with 128K BL32 real 50A ESC
- Built in Wi-Fi with 33% faster wireless firmware flashing
- Supports up to 8 motors
- 500mb Blackbox with easy wireless download of Blackbox data
- CNC heatsink for a cooler ESC
- Onboard 4-level battery life indicator
- Solder free plugs for digital vTX, receiver, camera, analog VTX, GPS, and 4x LED strips
Specifications
| Product Name | SpeedyBee F7 V3 Flight Controller |
| MCU | STM32F722 |
| IMU(Gyro) | BMI270 |
| USB Port Type | Type-C |
| Barometer | BMP280 |
| OSD Chip | AT7456E chip |
| BLE Bluetooth | Supported. Used for Flight Controller configuration |
| Flash FC Firmware Wirelessly | Supported. Please enter MENU > FC Firmware Flasher |
| Download/Analyze Blackbox | Supported.Please enter MENU > Blackbox Analyzer |
| DJI Air Unit Connection Way | Two ways supported: 6-pin connector or direct soldering. |
| Flash(for BlackBox) | 500MB |
| BetaFlight Camera Control Pad | Yes(CC pad on the front side) |
| Power Input | 3S – 6S Lipo |
| 5V Output | 10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A. |
| 9V Output | 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A. |
| 3.3V Output | Supported. Designed for 3.3V-input receivers. Up to 500mA current load. |
| 4.5V Output | Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. |
| ESC Signal Pads | M1 – M4 on bottom side and M5-M8 on front side. |
| UART | 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6) |
| ESC Telemetry UART | R4(UART4) |
| I2C | Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. |
| LED Pad | Used for WS2812 LED controlled by Betaflight firmware. |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| BOOT Button | Supported. [A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. [B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware. |
| RSSI Input | Supported. Named as RS on the front side. |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Supported Flight Controller Firmware | BetaFlight(Default), EMUFlight, INAV |
| Firmware Target Name | SPEEDYBEEF7V3 |
| Mounting | 30.5 x 30.5mm( 4mm hole diameter) |
| Dimension | 41(L) x 38(W) x 8.1(H)mm |
| Weight | 10.7g |
| Product Name | SpeedyBee BL32 50A 4-in-1 ESC |
| Firmware | SpeedyBee BL32 50A |
| Configurator Download Link | //github.com/bitdump/BLHeli/releases |
| Continuous Current | 50A * 4 |
| Burst Current | 55A(5S) |
| ESC Protocol | DSHOT300/600 |
| Power Input | 3-6S LiPo |
| Power Output | VBAT |
| Current Sensor | Support (Scale=490 Offset=0) |
| Mounting | 30.5 x 30.5mm( 4mm hole diameter) |
| Dimension | 45.6(L) * 40(W) * 8.8mm(H) |
| Weight | 19.2g with heat sink |
Includes
- 1x SpeedyBee F7 V3 30×30 Flight Controller for DJI
- 1x SpeedyBee 32Bit 50A 4in1 ESC
- Stack mounting hardware and connectors
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
OMP HV LiPo Battery 5100mAh 15.4V 4S for ZMO VTOL
SkyRC D200neo 200w AC/DC Battery Charger
SkyRC B6neo DC 200W Charger
RadioMaster Boxer Radio Transmitter w/ LEDs – ELRS 2.4GHz M2
RadioMaster Zorro LE Radio Control (ELRS)
Skyzone Cobra SD 5.8GHz FPV Goggles
HGLRC Zeus5 ES24 ELRS AIO VTX F411 Flight Controller 5A BL_S 5in1 ESC
Ethix D6 Pro 6S Charger
RunCam Racer Nano 4 FPV Camera
ViFly WhoopStor V3 6-Port 1S Battery Charger and Discharger – LiHV/LiPo
NeutronRC EXuav Lightning ESC 70A AM32 – F051
NeutronRC F411 OpenLager Black Box Recorder
NeutronRC F405 Mini Hold Flight Controller (20×20/30×30)
NeutronRC 20/30 Hold Mini 45A BLS 4in1 ESC
NeutronRC AT32F435 Flight Controller (20×20 or 30×30)
Ummagawd Aerolite 1605 3600KV Motor – Gunmetal/Blue
Ummagawd Aerolite 2306 1800KV Motor – Gunmetal/Red
Ummagawd 2Fiddy Ultra Light 4″ / 5″ FPV Freestyle Frame (Fits DJI O3)
Happymodel ELRS Fyujon AIO V2 2in1 Module (ELRS + VTX)
Shendrones Legato 7″ Long Range Cinematic Drone Frame (Carbon Hardware Only)