SpeedyBee F7 V3 30×30 Flight Stack w/ 50A BLheli32 ESC - SpeedyBee

Product overview

Part Number: SpeedyBee F7 V3 30×30 Flight Stack w/ 50A BLheli32 ESC

Manufacturer: SpeedyBee

Product Category: STACK, CONTROLLER AND ESC

Update Date: 2024-05-20

Description

SpeedyBee has stuffed everything you could ask for into thier V3 30×30 stack. it also includes all-new features that lets you flash firmware wirelessly from your phone. This also allows you to wirelessly access the blackbox logs and betaflight configurator to fine tune your drone to squeeze the most performance out of it.

Detailed Information

SpeedyBee F7 V3 flight stack - 50A BLHeli_32 ESC - bluetooth low energy and wifi connectivity

Features

Smartest F722 FC with 128K BL32 real 50A ESC
Built in Wi-Fi with 33% faster wireless firmware flashing
Supports up to 8 motors
500mb Blackbox with easy wireless download of Blackbox data
CNC heatsink for a cooler ESC
Onboard 4-level battery life indicator
Solder free plugs for digital vTX, receiver, camera, analog VTX, GPS, and 4x LED strips

Speedybee%20f7%20v3%20stack%20info

Specifications

Product Name	SpeedyBee F7 V3 Flight Controller
MCU	STM32F722
IMU(Gyro)	BMI270
USB Port Type	Type-C
Barometer	BMP280
OSD Chip	AT7456E chip
BLE Bluetooth	Supported. Used for Flight Controller configuration
Flash FC Firmware Wirelessly	Supported. Please enter MENU > FC Firmware Flasher
Download/Analyze Blackbox	Supported.Please enter MENU > Blackbox Analyzer
DJI Air Unit Connection Way	Two ways supported: 6-pin connector or direct soldering.
Flash(for BlackBox)	500MB
BetaFlight Camera Control Pad	Yes(CC pad on the front side)
Power Input	3S – 6S Lipo
5V Output	10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A.
9V Output	2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A.
3.3V Output	Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
4.5V Output	Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
ESC Signal Pads	M1 – M4 on bottom side and M5-M8 on front side.
UART	5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)
ESC Telemetry UART	R4(UART4)
I2C	Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc.
LED Pad	Used for WS2812 LED controlled by Betaflight firmware.
Buzzer	BZ+ and BZ- pad used for 5V Buzzer
BOOT Button	Supported. [A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. [B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.
RSSI Input	Supported. Named as RS on the front side.
SmartPort	Use any TX pad of UART for the SmartPort feature.
Supported Flight Controller Firmware	BetaFlight(Default), EMUFlight, INAV
Firmware Target Name	SPEEDYBEEF7V3
Mounting	30.5 x 30.5mm( 4mm hole diameter)
Dimension	41(L) x 38(W) x 8.1(H)mm
Weight	10.7g

Product Name	SpeedyBee BL32 50A 4-in-1 ESC
Firmware	SpeedyBee BL32 50A
Configurator Download Link	//github.com/bitdump/BLHeli/releases
Continuous Current	50A * 4
Burst Current	55A(5S)
ESC Protocol	DSHOT300/600
Power Input	3-6S LiPo
Power Output	VBAT
Current Sensor	Support (Scale=490 Offset=0)
Mounting	30.5 x 30.5mm( 4mm hole diameter)
Dimension	45.6(L) * 40(W) * 8.8mm(H)
Weight	19.2g with heat sink

Includes

1x SpeedyBee F7 V3 30×30 Flight Controller for DJI
1x SpeedyBee 32Bit 50A 4in1 ESC
Stack mounting hardware and connectors

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...

You May Also Be Interested In

Centurion X8 O3 6S HD Chimera7 Pro V2 6S Defender 25 4S HD Helion 10 O3 6S HD Mach R5 Sport 6S Race Drone Mach R5 Sport 6S HDZero Nazgul DC5 ECO 6S O3 HD Nazgul DC5 O3 6S HD Nazgul Evoque F4 6S HD Nazgul Evoque F5 V2 6S HD Nazgul Evoque F6 V2 6S HD Nazgul XL5 ECO V1.1 6S Nazgul5 V3 O3 6S HD ProTek60 Pro O3 6S HD Cinelifter Rabbitfilms x Defender 25 4S HD Taurus X8 Pro O3 8S HD Cinelifter Taurus X8 V3 O3 6S HD Cinelifter Afterburner 5 O3 6S HD Alpha A65 1S Tinywhoop - Commando 8 Lite Alpha A85 4S HD - RTF(Lite)