Product overview
- Part Number
- SpeedyBee F7 V3 30×30 Flight Controller
- Manufacturer
- SpeedyBee
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
SpeedyBee has stuffed everything you could ask for into this 30×30 FC. it also includes an all-new feature that lets you flash firmware wirelessly from your phone. Making this a FC that you never actually need to use the USB port on.
Detailed Information
Features
- Built in Wi-Fi with 33% faster wireless firmware flashing
- Supports up to 8 motors
- 500mb Blackbox with easy wireless download of Blackbox data
- Onboard 4-level battery life indicator
- Solder free plugs for digital vTX, receiver, camera, analog VTX, GPS, and 4x LED strips
Specifications
| Product Name | SpeedyBee F7 V3 Flight Controller |
| MCU | STM32F722 |
| IMU(Gyro) | BMI270 |
| USB Port Type | Type-C |
| Barometer | BMP280 |
| OSD Chip | AT7456E chip |
| BLE Bluetooth | Supported. Used for Flight Controller configuration |
| Flash FC Firmware Wirelessly | Supported. Please enter MENU > FC Firmware Flasher |
| Download/Analyze Blackbox | Supported.Please enter MENU > Blackbox Analyzer |
| DJI Air Unit Connection Way | Two ways supported: 6-pin connector or direct soldering. |
| Flash(for BlackBox) | 500MB |
| BetaFlight Camera Control Pad | Yes(CC pad on the front side) |
| Power Input | 3S – 6S Lipo |
| 5V Output | 10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A. |
| 9V Output | 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A. |
| 3.3V Output | Supported. Designed for 3.3V-input receivers. Up to 500mA current load. |
| 4.5V Output | Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. |
| ESC Signal Pads | M1 – M4 on bottom side and M5-M8 on front side. |
| UART | 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6) |
| ESC Telemetry UART | R4(UART4) |
| I2C | Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. |
| LED Pad | Used for WS2812 LED controlled by Betaflight firmware. |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| BOOT Button | Supported. [A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. [B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware. |
| RSSI Input | Supported. Named as RS on the front side. |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Supported Flight Controller Firmware | BetaFlight(Default), EMUFlight, INAV |
| Firmware Target Name | SPEEDYBEEF7V3 |
| Mounting | 30.5 x 30.5mm( 4mm hole diameter) |
| Dimension | 41(L) x 38(W) x 8.1(H)mm |
| Weight | 10.7g |
Includes
- 1x SpeedyBee F7 V3 30×30 Flight Controller
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Grove - Mini PIR Motion Sensor
Grove - 3-Axis Digital Accelerometer ±16g Ultra-low Power (BMA400)
Grove - AMG8833 8x8 Infrared Thermal Temperature Sensor Array
WD-40 300ml Multi-Use Spray with Smart Straw
25mm C-Mount Telephoto Lens for IMX477 Raspberry Pi High Quality Camera
35mm C-Mount Telephoto Lens for IMX477 Raspberry Pi High Quality Camera
Zcam Mount for Shendrones Siccario
Interface Cable - SMA Male to TNC Male (2m, 5m)
Mechaduino Compatible Nema 23 Closed Loop Servo Stepper Motor
TOF (time of flight) Laser Rangefinder UART / CAN Bus, Cascading Support (5m Range)
Cable Set For Pix32 V5
HolyBro H-RTK M8P Rover Lite 2nd Module
HolyBro H-RTK F9P Rover 2nd GPS Module
USB Audio Codec for Jetson Nano, USB Sound Card, Driver-Free, Plug And Play
3-Ch Relay Expansion Board Designed For Jetson Nano, Optocoupler Isolation
HolyBro GPS UART to USB Converter
High Precision Multi Band GNSS Survey RTK Antenna
High Precision Multi Band GNSS Active Antenna
Marvelmind Outdoor Navigation Positioning Modem w/ Case (HW V5.1)
Flexible Qwiic Cable - 100mm