Product overview
- Part Number
- SpeedyBee F7 V3 30×30 Flight Controller
- Manufacturer
- SpeedyBee
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
SpeedyBee has stuffed everything you could ask for into this 30×30 FC. it also includes an all-new feature that lets you flash firmware wirelessly from your phone. Making this a FC that you never actually need to use the USB port on.
Detailed Information
Features
- Built in Wi-Fi with 33% faster wireless firmware flashing
- Supports up to 8 motors
- 500mb Blackbox with easy wireless download of Blackbox data
- Onboard 4-level battery life indicator
- Solder free plugs for digital vTX, receiver, camera, analog VTX, GPS, and 4x LED strips
Specifications
| Product Name | SpeedyBee F7 V3 Flight Controller |
| MCU | STM32F722 |
| IMU(Gyro) | BMI270 |
| USB Port Type | Type-C |
| Barometer | BMP280 |
| OSD Chip | AT7456E chip |
| BLE Bluetooth | Supported. Used for Flight Controller configuration |
| Flash FC Firmware Wirelessly | Supported. Please enter MENU > FC Firmware Flasher |
| Download/Analyze Blackbox | Supported.Please enter MENU > Blackbox Analyzer |
| DJI Air Unit Connection Way | Two ways supported: 6-pin connector or direct soldering. |
| Flash(for BlackBox) | 500MB |
| BetaFlight Camera Control Pad | Yes(CC pad on the front side) |
| Power Input | 3S – 6S Lipo |
| 5V Output | 10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A. |
| 9V Output | 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A. |
| 3.3V Output | Supported. Designed for 3.3V-input receivers. Up to 500mA current load. |
| 4.5V Output | Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. |
| ESC Signal Pads | M1 – M4 on bottom side and M5-M8 on front side. |
| UART | 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6) |
| ESC Telemetry UART | R4(UART4) |
| I2C | Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. |
| LED Pad | Used for WS2812 LED controlled by Betaflight firmware. |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| BOOT Button | Supported. [A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. [B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware. |
| RSSI Input | Supported. Named as RS on the front side. |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Supported Flight Controller Firmware | BetaFlight(Default), EMUFlight, INAV |
| Firmware Target Name | SPEEDYBEEF7V3 |
| Mounting | 30.5 x 30.5mm( 4mm hole diameter) |
| Dimension | 41(L) x 38(W) x 8.1(H)mm |
| Weight | 10.7g |
Includes
- 1x SpeedyBee F7 V3 30×30 Flight Controller
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
SKYRC eFUEL 200W Power Supply
SkyRC iMax B6 V2 Charger
Rush FPV Lipo Strap 150 x 15mm (4 pack)
7inch HDMI IPS Capacitive Touch Screen LCD
Transtec F411 HD Flight Controller
Transtec Freedom HD 5″ Freestyle Quadcopter Frame
Transtec Beetle 2.5″ HD Frame
HQ Durable Prop T3x1.5×3 Grey (2CW + 2CCW) Polycarbonate
Foxeer Toothless 2 Nano Starlight FPV Camera
Furious True D Lite 40CH Diversity Receiver System
FuriousFPV External Cable for Smart Power Case V2
Furious True D 40CH Diversity Receiver System V4
FuriousFPV Racepit HD Flight Controller (DJI FPV Compatible)
Twiglet 2″ Toothpick Frame
Twig XL 3″ Toothpick Frame
BetaFPV BT2.0 – PH2.0 Adapter (pack of 6)
NLRC Nano400 VTX (25-400mW, 5V)
Jumper T16 Top Bracket Cover for USB-C Upgrade
Fonster Apro 3″ Toothpick Frame
Runcam Phoenix 2 Nano 1000TVL FPV Camera