Product overview
- Part Number
- SpeedyBee F745 35A BLS AIO Flight Controller
- Manufacturer
- SpeedyBee
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
The speedybee F745 AIO is the worlds first FC to include full wireless capability that means you can flash and fully configure both Betaflight and Blheli_s! In addition you get a powerful F745 MCU and a durable 35A ESC that uses Toshiba MOSFETs.Please note that this AIO is slightly bigger than normal AIO FC, so the manufacturer suggest this is ideal for 3.5″ to 5″ quadcopters. See details for full size info.
Detailed Information
Features
- Worlds first wireless AIO FC (flash and configure Betaflight and BLheli_s config without cables)
- Powerful F745 MCU
- Durable 35A ESC using Toshiba MOSFETs
- DJI plugs for digital builds
- 4 UARTS, Baro, I2C, 8MB Blackbox
Specifications
| Product Name | SpeedyBee F745 35A BLS AIO |
| Power Input | 3S – 6S Lipo |
| Mounting | 25.5 x 25.5mm, 3mm hole diameter |
| Dimension | 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5″ or above |
| Weight | 10.1g |
| FC | |
| MCU | STM32F745 |
| IMU(Gyro) | MPU6000 |
| USB Connection | Need to solder a USB TYPE-C module to D+,D-,GND pads. |
| Barometer | BMP280 |
| OSD | Supported |
| BLE Bluetooth | Supported. Used for parameter configuration |
| Flash FC Firmware Wirelessly | Supported |
| Download/Analyze Blackbox | Supported |
| DJI Air Unit 6-pin Connector | Built-in. |
| Flash(for BlackBox) | 8MB |
| Current Sensor | Supported. Scale=256 |
| BetaFlight Camera Control Pad | Yes(CC pad) |
| 5V Output | 4 groups of 5V output. The total current load is 2.5A. |
| 9V Output | None |
| 3.3V Output | Supported. Up to 500mA current load. |
| ESC Signal Pads | M1 – M4 |
| UART | Full UART * 4(UART1, UART2, UART3,UART4) |
| ESC Telemetry UART | None |
| I2C | Supported. |
| LED Pad | Used for WS2812 LED |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| BOOT Button | Used to enter DFU mode |
| RSSI Input | Not supported |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Supported Flight Controller | BetaFlight(Default) |
| Firmware Firmware Target Name | SPEEDYBEE F745AIO |
| ESC | |
| Power Input | 3-6S LiPo |
| Continuous Current | 35A * 4 |
| Burst Current | 45A(5S) |
| ESC Protocol | DSHOT300/600 |
| Power Output | VBAT |
| Current Sensor | Supported(Sacle=256) |
| Firmware | BLHeli_S JH40 |
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
3D Printed TPU Lens Cover
3D TPU Printed Base
Alum M2 Standoffs
Alum M3 Standoffs
Coaxial Cable for Chimera7 Pro
Finder Buzzer
MMCX 90° to SMA Female Adapter Cable
Motor Wire Shield Tube
Naked GoPro Power Cable -BEC
Nazgul Evoque F4 TPU Parts
Nazgul Evoque F5/F6 TPU Parts
Nazgul Evoque F5/F6 V2 TPU Parts
Nazgul XL5 ECO Replacement Parts
Nazgul5 V2/V3 3D Printed Parts
Nazgul5 V2/V3 Replacement Parts
ProTek35 TPU Parts
TITAN XL5 TPU Parts
Transmitter Neck Strap
XL7/XL8/XL10 Frame TPU Parts
XT30 M to XT60 F Adapter Cable