DarwinFPV BNF Baby Ape Pro V2 3″ Quad: Evolution in Every Spin

Attention all FPV pilots, propellers at the ready! You’ve been zipping through the skies, pushing your limits, and we heard your call for something extra. That’s why we present to you the all-new, reimagined DarwinFPV BNF Baby Ape Pro V2 3″ Quad – the Formula 1 car of the drone world!

Interest piqued? This beauty’s not just a pretty face, but a beast underneath. A beautiful culmination of feedback and ingenious engineering, it’s the drone equivalent of your favourite action hero. With a press-fit prop system, say goodbye to cumbersome screws, and hello to a fuss-free assembly! This feisty flier is set to soar higher, faster, and with more agility than a homesick angel!

Desire for more details? We’ve got plenty! We’ve replaced those old nylon standoffs with sturdier aluminum alloy ones – they’re like the spinach to Popeye, beefing up your drone’s frame and stabilising the structure. The updated receiver fixing bracket and the move from 4 individual arms to 2 integrated ones (3.0mm thick no less), means your baby is now a brawny beast. And worry not about tedious drone repairs! The V2 only needs 4 screws to fix, with an arm that can be replaced by removing just 2 screws. Easy-peasy!

And don’t even get us started on the specs! Featuring a power-packed motor with 4300 Kv, capable of handling 2-3S input voltage, this gadget doesn’t know the meaning of ‘slow’. Coupled with a responsive STM32F411 MCU and gyro MPU6000, your flying will be as smooth as a baby’s bottom! And if you like flipping switches, the VTX RF Output Power comes with 0mW/25mW/100mW/200mW options.

Action time! Tired of reading? Get your own DarwinFPV BNF Baby Ape Pro V2 3″ Quad and let it do the talking. With all these upgraded features, it’s like your old drone took a sip from the Fountain of Youth! Don’t just fly; dominate the skies with the DarwinFPV selection! Remember, “It’s not about the drone, it’s about the pilot. But a great drone doesn’t hurt.”

Key Product Highlights:

• Press-fit prop system for a hassle-free assembly
• Upgraded aluminum alloy standoffs for a beefier frame and improved stability
• Updated receiver fixing bracket
• Upgraded from 4 individual arms to 2 integrated arms (3.0mm thickness) for sturdier, more durable flights
• V2 version only needs 4 screws to fix, and arm can be replaced by removing just 2 screws for easier repair
• Power-packed motor with 4300 Kv, capable of handling 2-3S input voltage
• Features a responsive STM32F411 MCU and gyro MPU6000 for smooth and precise flights
• VTX RF Output Power comes with 0mW/25mW/100mW/200mW switchable options

Don’t just take our word for it! Check out all of our BNF quads as well as the rest of our DarwinFPV selection. Soar to new heights with Unmanned Tech – the UK’s top destination for FPV, IoT, and maker enthusiasts!

Specifications

CADDX ANT Camera

Resolution:1200TVL

mage Sensor: 1/3″ CMos Sensor

Input: DC 3.7-18V

TV System: PAL/NTSC

1104 4300KV 2-3S Brushless Motor

KV: 4300KV

Lipo cell: 2-3S

AIO 4 IN 1 15A BLHeli_S  ESC

Input voltage: 1-3SLiPo

Continuous current: 15A

Pe ak current:17A (10S)

BEC output: no

Main control chip:EFM8BB21

Firmware upgrade: Supports Dshot600/Oneshot125

MOS: 3*3

F411 AIO Flight Controller

Main control chip: STM32F411

Integrated OSD

PPM/DSM/IBUS/UAR share: UART1-RX

IMU: MPU6500 (SPI)

Mounting holes distance: 25.5*25.5mm

Supports Betaflight firmware

5.8G 40CH 0mW/25mw/200mw switchable VTX

Supports TBS SmartAudio

Transmitting power: 0mW/25mW/100mW/200mW switchable

Channel: 40CH

Full video format: NTSC/PAL

Input voltage: 7V~24V

Power dissipation: +12V/600MW

Size: 25×20×6mm

Weight: ≤3.2g (except antenna)

With copper pipe mini antenna (ipex antenna)

3016 3-blade propelle

Mounting hole: 1.5mm

Center thickness: 5.5mm

Quantity: 2 pairs

Weight: 1.18g a pair

Included

• 1x Baby Ape Pro V2 Drone
• 3″ Propellers
• Set of screws