Product overview
- Part Number
- Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC – 20×20
- Manufacturer
- Flycolor
- Product Category
- STACK, CONTROLLER AND ESC
- Update Date
- 2024-05-20
Description
Imagine your drone’s like a pint of lager on a sunny day. The Trinx G5’s heat sink is like that chap who insists on a coaster – keeps things cool and prevents a mess. Essential for pilots who don’t fancy their tech going all melty mid-flight!
Detailed Information
Oi, drone enthusiasts! Are you ready to elevate your drone’s performance to the stratosphere with the Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC? This little marvel isn’t just any ordinary ESC; it’s a pint-sized powerhouse designed to transform your racing drone into a high-flying speed demon. Let’s dive into what makes the Trinx G20 the talk of the town—or the skies, rather!
Features That’ll Make Your Propellers Spin
Advanced Input Signal Support
- Variety’s the Spice of Flight: From the standard 1-2ms pulse width to the zippy Oneshot125 and Multishot, this ESC adapts faster than a chameleon in a disco. The input signal detection is automatic, making setup a breeze.
Firmware Optimization
- Smooth Operator: The updated firmware isn’t just a minor upgrade; it’s a quantum leap that smoothens throttle linearity and injects your drone with the response time of a caffeinated cat.
Damped Light Technology
- Stop on a Sixpence: Regenerative braking isn’t just for electric cars anymore. This feature slows your motors down faster than you can say “Bob’s your uncle,” providing precise control when you need it most.
High-Frequency PWM
- Smooth as Butter: With a PWM frequency reaching up to 128K, this ESC ensures your drone’s flight is smoother than a well-oiled teacup ride.
Compact and Mighty
- Small but Mighty: Don’t let the 20x20mm size fool you. This ESC packs a punch, supporting high power loads for when you need to unleash the beast in your drone.
Cutting-Edge Tech
- Brains and Brawn: Powered by an ARM 32-bit Cortex MCU STM32G0, this ESC is the brainiac of the racing circuit, handling complex calculations at breakneck speeds.
Specifications
- Firmware: Flycolor_Raptor_5
- Configurator: BLHeliSuite32
- Model: Flycolor TRINX G20
- Mounting: 20x20mm,M3
- Burst Current: 70A (10s)
- Size: 44x36x6.3mm
- Con. Current: 60A
- LiPo cells: 3-6S
- BEC: No BEC
- Weight: 14.4g
Includes
- 1x Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC – 20×20
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
-
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
-
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
-
You May Also Be Interested In
45 Degree SMA Connector (pack of 2)
SMA Female to RP-SMA Male Adapter (pack of 2)
RJX 13 in 1 Screw and Nut Driver set
LORA Antenna for Reach RS
XT30 Male Battery Wire 7cm 18AWG silicone wire
Remote Control Servo Release Hook
Portable 2.4 GHz Spectrum Analyser (OLED Display)
PingUSB / uProg USB ADS-B Receiver
6 pin JST-GH Connector to 3 pin 1.25mm JST Connector Cable (for FPV200 Bundle Pack)
FuriousFPV 72mm u.fl to SMA or RP-SMA cable
Lightware SF40/C (100 m) LiDar
Lightware SF20 100m Laser Rangefinder Lidar Module
Lightware LW20 100m Laser Sensor
8 Pin JST-SH Omnibus to 4in1 ESC Cable v2 (7cm)
8 Pin JST-SH Omnibus to 4in1 ESC Cable v2 (3cm)
ESC Cable Pack
Armattan Quad Solder
XT60 Male to Dean Style Female Adapter Connector (Pack of 5)
Bullet Motor Quick Release Tool Wrench (for M3/M4/M5/M6 nuts)
Benewake Solid State Lidar CE30-A