Product overview
- Part Number
- Happymodel Mobula6 2024 ELRS 2.4Ghz BNF Brushless Whoop
- Manufacturer
- Happymodel
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
Detailed Information
Unveil the thrill of indoor flying with the Mobula6 2024 – a marvel in the mini-drone arena that doesn’t just fly, it pirouettes through the air with the grace of a ballet dancer and the precision of a hawk. With its dainty 65mm size, this little dynamo is not just a drone; it’s a pocket-sized powerhouse that’s ready to redefine your indoor flying experience.
Please note, this drone ships with a A30 battery connector from GNB. While this does not officially support BT2.0 batteries, BT2.0 batteries still fit into a A30 connector, the plastic flexes slightly to make the fit quite snug, but you can still use BT2.0 batteries with A30 connectors. However, we still recommend that you buy a BT2.0 connector and install it on this drone since BT2.0 is much more universally used for whoops.
At the heart of this aerial acrobat is the new AIO SuperX, a techno-wonder that marries an ExpressLRS 2.4G receiver with an OpenVTX 5.8G, ensuring your controls are as sharp as a samurai’s katana. And with the Mobula6’s SE0702 brushless motors, you’re not just flying; you’re commanding a squadron of miniature jet engines at your fingertips.
But let’s not forget the pièce de résistance, the FX17-B camera, transforming your flight into a cinematic voyage, with the NTSC signal system offering a front-row seat to the action. And for those who speak tech fluently, the Mobula6 2024 is compatible with 1S LiPo/LiHV, making power concerns a thing of the past.
Specifications? Oh, we’ve got them:
- A 65mm wheelbase that’s more agile than a cat on a hot tin roof.
- A featherweight figure at 17.7g – because who likes a heavy lifter?
- SE0702 motors that scream ‘petite but mighty.’
- Gemfan 1208-3 propellers, because three blades are better than two, right?
- A visual feast awaits with the FX17-B 1/3 CMOS 800TVL Camera.
And let’s not gloss over the bullet points, the cherries on top:
- An all-in-one tech fest with OpenVTX 5.8G and ERLS 2.4G serial receiver.
- A weight that would make a feather look obese.
- SE0702 motors that redefine ‘lightweight powerhouse.’
- The FX17-B camera: because what’s flying if you can’t relive it in high-definition?
User Manual
Mobula6-2024-1S-65mm-micro-fpv-whoop-manual
In the box, find your new best friend, the Mobula6 2024, along with its trusty sidekicks: the SuperX ELRS AIO 5-IN-1 Flight controller, a quartet of SE0702 KV28000 brushless motors, eight Gemfan 1208-3 31mm tri-blade propellers, and more.
So, if you’re ready to turn your living room into the next great flight arena, the Mobula6 2024 is your ticket to the show. Prepare for takeoff, and let the indoor adventures begin!
Specifications
Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g
Option:
V1.0 version with SuperX ELRS V1.0 AIO
V2.0 version with SuperX ELRS V2.0 AIO
The only difference is v2.0 AIO FC comes with motor plug but V1.0 AIO FC is no motor plug
Spare parts specifications:
Motor | Mode: SE0702 KV28000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only |
Propellers | Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm |
Flight controller | SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 1175 |
Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200 |
Onboard Serial ExpressLRS receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx |
Onboard 5.8g VTX | Firmware version: OPENVTX MSP VTX PIT Mode support Channels:40ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
FX17-B Camera | Model:FX17-B Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL FOV 150° Signal System: NTSC Net Weight: 1.5g Dimensions: L14mm*W14mm*H13mm |
Included
- 1x Happymodel MObula6 2024 ELRS Quadcopter
- 1x Accessories kit
No battery is included, we suggest a 1S 300-350mAh Lipo
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
-
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
-
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
-