Product overview

Part Number
Happymodel Mobula6 2024 ELRS 2.4Ghz BNF Brushless Whoop
Manufacturer
Happymodel
Product Category
OTHER PARTS
Update Date
2024-05-20

Description

Imagine a hummingbird on steroids, that’s the Mobula6 2024. With its SE0702 motors, it’s like strapping a V8 to a skateboard. Perfect for FPV pilots who love a good indoor adrenaline rush!No battery is included, we suggest a 1S 300-350mAh Lipo ,BT2.0 can fit into A30 connectors, but is not officially supported, read description for more info.

Detailed Information

Unveil the thrill of indoor flying with the Mobula6 2024 – a marvel in the mini-drone arena that doesn’t just fly, it pirouettes through the air with the grace of a ballet dancer and the precision of a hawk. With its dainty 65mm size, this little dynamo is not just a drone; it’s a pocket-sized powerhouse that’s ready to redefine your indoor flying experience.

Please note, this drone ships with a A30 battery connector from GNB.  While this does not officially support BT2.0 batteries, BT2.0 batteries still fit into a A30 connector, the plastic flexes slightly to make the fit quite snug, but you can still use BT2.0 batteries with A30 connectors.  However, we still recommend that you buy a BT2.0 connector and install it on this drone since BT2.0 is much more universally used for whoops.

At the heart of this aerial acrobat is the new AIO SuperX, a techno-wonder that marries an ExpressLRS 2.4G receiver with an OpenVTX 5.8G, ensuring your controls are as sharp as a samurai’s katana. And with the Mobula6’s SE0702 brushless motors, you’re not just flying; you’re commanding a squadron of miniature jet engines at your fingertips.

But let’s not forget the pièce de résistance, the FX17-B camera, transforming your flight into a cinematic voyage, with the NTSC signal system offering a front-row seat to the action. And for those who speak tech fluently, the Mobula6 2024 is compatible with 1S LiPo/LiHV, making power concerns a thing of the past.

Specifications? Oh, we’ve got them:

  • A 65mm wheelbase that’s more agile than a cat on a hot tin roof.
  • A featherweight figure at 17.7g – because who likes a heavy lifter?
  • SE0702 motors that scream ‘petite but mighty.’
  • Gemfan 1208-3 propellers, because three blades are better than two, right?
  • A visual feast awaits with the FX17-B 1/3 CMOS 800TVL Camera.

And let’s not gloss over the bullet points, the cherries on top:

  • An all-in-one tech fest with OpenVTX 5.8G and ERLS 2.4G serial receiver.
  • A weight that would make a feather look obese.
  • SE0702 motors that redefine ‘lightweight powerhouse.’
  • The FX17-B camera: because what’s flying if you can’t relive it in high-definition?

User Manual

Mobula6-2024-1S-65mm-micro-fpv-whoop-manual

In the box, find your new best friend, the Mobula6 2024, along with its trusty sidekicks: the SuperX ELRS AIO 5-IN-1 Flight controller, a quartet of SE0702 KV28000 brushless motors, eight Gemfan 1208-3 31mm tri-blade propellers, and more.

So, if you’re ready to turn your living room into the next great flight arena, the Mobula6 2024 is your ticket to the show. Prepare for takeoff, and let the indoor adventures begin!

Specifications

Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g
Option:
V1.0 version with SuperX ELRS V1.0 AIO
V2.0 version with SuperX ELRS V2.0 AIO
The only difference is v2.0 AIO FC comes with motor plug but V1.0 AIO FC is no motor plug

Spare parts specifications:

MotorMode: SE0702 KV28000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only
PropellersMaterials: PC
Inch: 31mm
Pitch: 0.8 in
Weight: 0.21g
Mount hole diameter:  1mm
Flight controllerSuperX ELRS AIO 5-IN-1 Flight controller
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
Sensor:BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
Built-in UART ExpressLRS v3.0.0
Built-in voltage meter sensor , voltage meter scale 110
Built-in current meter sensor , current meter scale 1175
Onboard 4in1 ESCPower supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay v0.19.2
Default protocol: DSHOT300
Recommend ESC Startup power value to min1100/max1200
Onboard Serial ExpressLRS receiverPacket Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire antenna
Telemetry output Power: <12dBm
Receiver protocol: Serial_based CRSF
Compatible with ExpressLRS V3.x.x TX Module
Could flash single ELRS receiver firmware by Wifi
ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx
Onboard 5.8g VTXFirmware version: OPENVTX
MSP VTX
PIT Mode support
Channels:40ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL
FX17-B CameraModel:FX17-B
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
FOV 150°
Signal System: NTSC
Net Weight: 1.5g
Dimensions: L14mm*W14mm*H13mm

Included

  • 1x Happymodel MObula6 2024 ELRS Quadcopter
  • 1x Accessories kit

No battery is included, we suggest a 1S 300-350mAh Lipo

Price & Procurement

Associated Product