Product overview
- Part Number
- Crazybee F4 Lite Whoop Flight Controller with VTX
- Manufacturer
- Happymodel
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
This is the the flight controller used on the mobula6. It features a with a built in SPI receiver (FRsky / Flysky), MPU6000 gyro, betaflight OSD and a F411 MCU. All this packed into a tiny whoop form factor FC.
Detailed Information
This is the the flight controller used on the mobula6. It features a with a built in SPI receiver (FRsky / Flysky), MPU6000 gyro, betaflight OSD and a F411 MCU. All this packed into a tiny whoop form factor FC.
Specification
| Crazybee F4 LiteFlight Controller Built-in ESC & Receiver & VTX | Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection |
| Onboard Frsky Receiver Version | SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model – Frsky_x_lbt Support EU LBT Radio Transmitter Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m |
| Onboard Flysky Receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support |
| Onboard 5A BLheli_S 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 |
| Onboard 5.8G 40CH 25mW VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band |
Included
- 1x Crazybee F4 Lite Flight Controller
- 4x Anti-Vibration Ball
- 4x Screws
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Camera Butter Glass ND Filter for Session 4/5 V2 (ND4/8/16/32)
Camera Butter Shield Lens Protector – GoPro Hero 8
TBS Tango 2 Pro Crossfire R/C Controller
TBS Tango 2 Crossfire R/C Controller
Camera Butter Glass ND Filter for GoPro Hero 5/6/7 V2 (ND4/8/16/32)
Mamba F4 AIO 13A Toothpick Flight Controller (2-4S)
Camera Butter Shield Lens Protector – GoPro Session 4/5
Camera Butter Shield Lens Protector – GoPro Hero 5/6/7
Foxeer Wildfire 5.8Ghz RX Module
Foxeer Toothless 2 Mini FPV Camera
Foxeer Razer Nano FPV Camera 1200TVL
Matek Analog Pixel Graphical OSD Board
BetaFPV TWIG XL 3″ Toothpick Quadcopter (BNF)
DAL Nepal N1 Freestyle 5.1″ Propeller
RunCam Swift Mini 2 – Mr Steele Edition – 600TVL CCD FPV Camera 2.5mm
Tattu R-Line 650mAh 11.1V 3S1P 95C Lipo Battery
Tattu R-Line 650mAh 95C 22.2V 6S1P Lipo Battery Pack with XT30U-F Plug
Tattu R-Line 650mAh 14.8V 4S1P 95C Lipo Battery
Camera Butter Replacement Sticky Adhesive Pack
Camera Butter Glass ND Filter for GoPro Hero 8 / Hero 9 V2 (ND4/8/16/32)