Product overview
- Part Number
- CrazyF411 AIO Toothpick Flight Controller + Receiver (20A ESC, OSD, Frsky RX)
- Manufacturer
- Happymodel
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
The CrazyF411 from Happymodel is an F4 toothpick flight controller with OSD, that also managed to include 4x 20A ESC and a Frsky compatible receiver built into the board, making this flight controller ideal for a very compact and lightweight toothpick build.
Detailed Information
The CrazyF411 from Happymodel is an F4 toothpick flight controller with OSD, that also managed to include 4x 20A ESC and a Frsky compatible receiver built into the board, making this flight controller ideal for a very compact and lightweight toothpick build.
The receiver also includes a PA/LNA power amplifier to enable much greater range compared to some other flight controllers with built in receivers (up to 400m range).
Features
- 25.5×25.5mm FC AIO ESC board for toothpick .
- Most powerful for whoop / toothpick style flight
- Supports 2-4s battery input and provides 20A to the motors.
- Also Integrated SPI Frsky receiver working with D8/D16 protocols.
- This integrated receiver has PA/LNA power amplifier and the diversity antenna., This should give more control range for this flight controller.
Specification
Brand Name: Happymodel
Model: CrazyF411 AIO
Item Name: F4 Flight Controller Built-in 20A BL_S ESC & Frsky Receiver
| F4 Flight Controller | MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 8V-17V) Built-in 20A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Frsky D8/D16 SPI receiverBuilt-in 2.4G Power Amplification Built-in Betaflight OSD(SPI Control) Built-in Current meter Built-in 5V 1.5A BEC Built-in voltage detection Firmware target: MATEKF411RX Yaw Degrees should set to “-90 degree” to match the flight direction |
| Onboard 20A ESC | MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 20A continuous peak 25A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_7.HEX Default protocol: DSHOT600 |
| Internal Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 compatibleCompatible Non EU transmitter both D8 mode and D16 mode Channels: 8ch/16chDual antenna Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 400m |
Connection Diagram Pinout
How to Bind your receiver
Make the on board receiver get into bind mode: For 4.0.x version firmware Plug USB and then connect betaflight configurator and then move to CLI tab , type “bind_rx_spi” ,the Red LED on the top of the flight controller will getting to be solid , the onboard receiver is in bind mode; For 4.1.x or 4.2.x the bind code is “bind_rx”
Included
- 1x F4 AIO ESC RX Board
- 1x Cable with Connector
- 1x bag of Screws & Standoffs
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Rotorama Buddy 5"
Rotorama Buddy 5" Deadcat
Rotorama Dito Pro 5"
Wasp
Rotorama Calypso 5"
Bouncer
Rotorama Calypso 3"
Rotorama Meffie 3" V2
Readytosky Mark4 10" V2
Mark4 LR8
Foxeer MEGA 7" Deadcat
7 EVO V1.2
Roma F7
TBS Source One V5 7" DC
Readytosky Mark4 7"
Readytosky Alien 7"
Volador II VD6
FlyfishRC Fifty5 (5,5")
5 V5
8AWG cable (1 meter)