Product overview
- Part Number
- Happymodel X12 ELRS 5in1 AIO Flight Controller
- Manufacturer
- Happymodel
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
The ELRS X12 supports ELRS V2.0 and OpenTX paired with Betaflight gives you the best in terms of open-source RX. TX and flight control, all on a single integrated FC.This is the flight controller used on the Mobula7 1S. We also sell an Frsky version of this FC
Detailed Information
The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver which support Frsky D8/D16 , REDPINE and SFHSS. This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.
Specification
- Brand Name: Happymodel
- Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
- Betaflight firmware target:
- ELRS Version: CRAZYBEEF4SX1280
- VTX antenna: U.FL
- Weight: 5.1g
- Support 1-2S Lipo/LIHV battery
- Size: 30mm*30mm*8mm
| Flight controller | X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 or BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470 |
| Onboard 4in1 ESC | Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware When use Blujay firmware with 48khz, should set startup power to 1100/1200 |
| Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 |
| Onboard Frsky SPI D8/D16 receiver Version | SPI BUS receiver CC2500 RF Compatible Non EU transmitter D8 model Channels: 8ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Support Frsky D8/ D16 , Redpine , SFHSS |
| Onboard 5.8g OPENVTX | Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
Included
- 1 x ELRS X12 ERLS AIO Flight Controller Board
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Jumper T16 Ribbon Cables
Radiomaster TX16S OpenTX Multiprotocol Radio Transmitter
HolyBro Kopis Mini 3″ FPV Quadcopter Frame
FrSky Archer M+ 2.4Ghz Micro SBUS Receiver (ACCESS OTA)
FRsky Archer R8 Pro 2.4Ghz Receiver (ACCESS OTA)
Frsky R9 SX 868MHz Long Range Receiver (ACCESS OTA)
FrSky R9 MX 868 MHz Enhanced R9 Long-Range Receiver (ACCESS OTA)
Azure Vanover 5.1″ Tri Blade Propellers
Jumper T18 Pro Radio Transmitter (Internal 5in1 TX + ALPS RDC90 Gimbals)
Cockroach V4 Pro HD 5″ Freestyle Quadcopter Frame
Solenoid – 5V (Small)
GPS/GNSS Embedded Antenna – 1m (SMA)
SparkFun GPS Breakout – ZOE-M8Q (Qwiic)
SparkFun GPS Breakout – Chip Antenna, SAM-M8Q (Qwiic)
Molex Flexible GNSS Antenna – U.FL (Adhesive)
SparkFun GPS-RTK-SMA Breakout – ZED-F9P (Qwiic)
GPS/GNSS Magnetic Mount Antenna – 3m (SMA)
SparkFun Serial Basic Breakout – CH340G (USB-C)
SparkFun Serial Basic Breakout – CH340G (Micro USB)
SparkFun GPS Breakout – NEO-M9N, U.FL (Qwiic)