Product overview
- Part Number
- control equipment radio zor elrs
- Manufacturer
- Radiomaster
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
Ergonomic design.
Large bright display.
Nano slot for external RF module.
USB Type C for charging and connecting to a computer.
Headphone output.
Powered by two Li-Ion 18350 batteries ( not included ) installed in the handle housings or any external 2S battery (there is an input for an external power source).
Sticks on Hall sensors with adjustable stroke and spring tension without disassembling the case.
Folding antenna.
Firmware update via SD or USB.
Switching between Mode 2 and Mode 1 without disassembling the case.
Dimensions: 170x159x108 mm
Weight: 350 g
Internal RF module: ELRS 2.4GHz 250mW
Antenna: 2dB
Current consumption: 160mA @8.4V
Power: 6.6-8.4V
Firmware: EdgeTX / OpenTX
Number of channels: up to 16
Screen: 126x64
Batteries: 2x 18350 (not included)
Large bright display.
Nano slot for external RF module.
USB Type C for charging and connecting to a computer.
Headphone output.
Powered by two Li-Ion 18350 batteries ( not included ) installed in the handle housings or any external 2S battery (there is an input for an external power source).
Sticks on Hall sensors with adjustable stroke and spring tension without disassembling the case.
Folding antenna.
Firmware update via SD or USB.
Switching between Mode 2 and Mode 1 without disassembling the case.
Dimensions: 170x159x108 mm
Weight: 350 g
Internal RF module: ELRS 2.4GHz 250mW
Antenna: 2dB
Current consumption: 160mA @8.4V
Power: 6.6-8.4V
Firmware: EdgeTX / OpenTX
Number of channels: up to 16
Screen: 126x64
Batteries: 2x 18350 (not included)
Detailed Information
RadioMaster Zorro ELRS control equipment - compact remote control with built-in ELRS transmitter.
Peculiarities
- Ergonomic design.
- Large bright display.
- Nano slot for external RF module.
- USB Type C for charging and connecting to a computer.
- Headphone output.
- Powered by two Li-Ion 18350 batteries ( not included ) installed in the handle housings or any external 2S battery (there is an input for an external power source).
- Sticks on Hall sensors with adjustable stroke and spring tension without disassembling the case.
- Folding antenna.
- Firmware update via SD or USB.
- Switching between Mode 2 and Mode 1 without disassembling the case.
Characteristics
- Dimensions: 170x159x108 mm
- Weight: 350 g
- Internal RF module: ELRS 2.4GHz 250mW
- Antenna: 2dB
- Current consumption: 160mA @8.4V
- Power: 6.6-8.4V
- Firmware: EdgeTX / OpenTX
- Number of channels: up to 16
- Screen: 126x64
- Batteries: 2x 18350 (not included)
The complete set, characteristics, layout, etc. may be changed by the manufacturer without additional notice. You can find up-to-date information on the manufacturer's website.
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Shendrones 3D Printed Frame Parts for Siccario X8
Replacement Arms Aquila 4" or 5" (Front / Back)
BetaFPV Lipo Strap Kit with No-Slip Rubber Pads
BetaFPV Pavo30 Prop Guard Ducts
Shendrones 3D Printed Frame Parts for Ichabod JR. 2.0
Replacement Pro Gimbal for TBS Tango 2
Replacement Antenna for TBS Tango 2 Nostalga (Transparent)
Replacement Antenna for TBS Tango 2
Travel Limitation Screws Set for TBS Tango 2
Replacement Duct for Diatone Tina 1.6 inch (Fits 40mm props)
Mount for Insta360 Go (Part A) for Emax Babyhawk II HD
Damping balls and the screw sets for Crux3
Canopy for Crux3 / Bassline / Mobula 8
Crux3 bottom 3K Carbon Frame
Armattan Tadpole Top Plate Adhesive Battery Foam
Armattan Tadpole Top Plate
Module Bay Add-on for TBS Tango 2
EMAX Tinyhawk II Freestyle - Replacement Bottom Frame Plate
TheFPV A6 Micro AIO FPV Camera and 25mW VTX
TheFPV BS2 OSD Micro AIO FPV Camera and 25mW VTX