Environmental Sensor Module for Jetson Nano, I2C Bus, with 1.3inch OLED Display - Waveshare

Product overview

Part Number: Environmental Sensor Module for Jetson Nano, I2C Bus, with 1.3inch OLED Display

Manufacturer: Waveshare

Product Category: OTHER PARTS

Update Date: 2024-05-20

Description

This environment sensors module gives Jetson Nano Developer Kit the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc. It can also be used to build a robot that can detect motion and orientation.Jeson Nano is not included

Detailed Information

Environment sensor for jetson nano details 1

Features

Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
Onboard Si1145 sensor, for measuring IR/UV rays
Onboard SGP40 sensor, for detecting ambient VOC
Onboard 1.3inch OLED display, for displaying environment data in real time
I2C bus, allows reading and displaying data by just using two wires
Comes with development resources and user manual (python examples)

Onboard 1.3inch OLED

Displaying Collected Environment Data In Real Time

Environment sensor for jetson nano details 3

Includes

Note: Jetson Nano is NOT included.

Jetson enviromental sensor lit

Board Overview

Environment sensor for jetson nano details intro

TSL25911FN
digital ambient light sensor, for measuring IR and visible light
SGP40
VOC sensor
Si1145
IR/UV sensor
ICM20948
3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer
BME280
measuring temperature, humidity, and air pressure sensor
1.3inch OLED
128×64 resolution
Voltage level translator
5V to 3.3V/1.8V

Dimension

Environment sensor for jetson nano details size

Specifications

TSL25911FN DIGITAL AMBIENT LIGHT SENSOR
I2C address	0x29
Effective range	0~88000Lux
BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR
I2C address	0x76
Temperature detection	-40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy)
Humidity detection	0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay)
Air pressure detection	300~1100hPa (0.18Pa resolution, ±1hPa accuracy)
ICM20948 MOTION SENSOR (9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCROPE, 3-AXIS MAGNETOMETER)
I2C address	0x68
Accelerometer resolution	16-bit
Accelerometer range (configurable)	±2, ±4, ±8, ±16g
Gyroscope resolution	16-bit
Gyroscope range (configurable)	±250, ±500, ±1000, ±2000°/sec
Magnetometer resolution	16-bit
Magnetometer range	±4900µT
SI1145 IR/UV SENSOR
I2C address	0x60
Response wavelength	280nm – 950nm
SGP40 VOC SENSOR
I2C address	0x59
Measuring range	0 ~ 1,000 ppm ethanol equivalent
Limit condition	< 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail)
Response time	< 10 s (tau 63 %)
Start time	< 60 s
On-chip humidity compensation support
OLED DISPLAY
I2C address	0x3C
Driver IC	SH1106
Resolution	128×64
Display color	blue

Resources

Product Wiki

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...