Product overview
- Part Number
- Grove - Ultrasonic Distance Sensor
- Manufacturer
- Seeed Studio
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
The Grove – Ultrasonic Distance Sensor is an ultrasonic transducer that utilizes ultrasonic waves to measures distance. It can measure from 3cm to 350cm with the accuracy up to 2mm.
Detailed Information
The Grove – Ultrasonic Distance Sensor is an ultrasonic transducer that utilizes ultrasonic waves to measures distance. It can measure from 3cm to 350cm with the accuracy up to 2mm. It is a perfect ultrasonic module for distance measurement, proximity sensors, and ultrasonic detector.
This module has an ultrasonic transmitter and an ultrasonic receiver so you can consider it as an ultrasonic transceiver. Familiar with sonar, when the 40KHz ultrasonic wave generated by the transmitter encounters the object, the sound wave will be emitted back, and the receiver can receive the reflected ultrasonic wave. It is only necessary to calculate the time from the transmission to the reception, and then multiply the speed of the sound in the air(340 m/s) to calculate the distance from the sensor to the object.
Compared with traditional ultrasonic modules HC-SR04, the Grove – Ultrasonic Distance Sensor integrates a single-chip microcomputer, and the transmitting signal and the receiving signal share one pin by time division multiplexing, so only one I/O pin is occupied. Another difference is that HC-SR04 only supports 5v voltage, while Grove – Ultrasonic Distance Sensor supports 5v and 3.3v. As we know, the Raspberry pi I/O only supports 3.3v. Therefore, Grove – Ultrasonic Distance Sensor can be directly connected to the I/O of the Raspberry Pi, but HC-SR04 needs to use a voltage conversion circuit.
What’s more, we provide full documents and libraries for Arduino, Python, and Codecraft so that you can use the Grove – Ultrasonic Distance Sensor with Arduino and Raspberry pi easily. Wide voltage range, single I/O pin, plug and play Grove connector, we try our best to make this module easier to use and reduce your work. This is exactly the philosophy of Grove: simple is the best. We hope you like it.
Features
- 3.3v / 5v compatible, wide voltage level: 3.2v~5.2v
- Only 3 pins needed, save I/O resources
- Wide measurement range: 3cm ~ 350cm
- Easy to use: grove connector, plug and play
Applications
- Distance measurement
- Ultrasonic detector
- Proximity alarm
- Smart car
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
battery GNB 550mah 1s 100c hv
rama bk quadcopter moblite7 v4
BC quadcopter frame mobula7 version 3 black
BC quadcopter frame mobula7 version 2 black
moblite7 v4 quadcopter frame (black)
current limiter
frame quadcopter mobula8
battery GNB 850mah 1s 60c hv
charging cable for 4 batteries with ph2.0 connector
battery GNB 850mah 1s 60c hv (a30) with cable
charging cable for 6 batteries with ph2.0 connector
antenna foxeer mic lollipop pa1448 rhcp ufl (without packaging 1 pc.)
camera caddx ant lite 4:3 (fpvcycle edition)
camera caddx ant 16:9
camera caddx ant 4:3
motor happymodel ex0802 kv19000 (4 pcs.)
charger vifly whoopstor v3
motor happymodel ex1103 kv11000 (4 pcs.)
motor happymodel se0702 kv23000 (4 pcs.)
motor happymodel rs0802 kv20000 (4 pcs.)