DSO Nano v3 Pocket Digital Storage Oscilloscope (1MHz) - Seeed Studio

Product overview

Part Number: DSO Nano v3 Pocket Digital Storage Oscilloscope (1MHz)

Manufacturer: Seeed Studio

Product Category: OTHER PARTS

Update Date: 2024-05-20

Detailed Information

DSO Nano v3 is a 32bit digital storage oscilloscope. Based on ARM -M3, it’s equipped with 320*240 color display, SD card, USB port and recharging function. It’s compact, simple to operate; meets the basic demands of school lab, electric furniture repairmen and electric engineering. The version 3 of DSO Nano differs from version 2 in that it does not use white plastic shell. Instead, it uses black metal shell which is more durable and strong.

Features

Portable and lightweight
Color display
Waveform storage and playback
6 triggering modes
200Khz Analog Bandwidth
Complete measurement markers and signal characteristics
Built-in Signal Generator
Accessories available
Open Source

Specifications

Display: Full Color 2.8″ TFT LCD 65K 320×240
Analog bandwidth: 0 – 200KHz
Max sample rate: 1Msps 12Bits
Sample memory depth: 4096 Point
Horizontal sensitivity: adjustable with indicator
Vertical sensitivity: 10mV/Div~10V/Div (with ×1 probe)/ 0.5V/Div~100V/Div (with ×10 probe)
Vertical position: adjustable with indicator
Input impedance: >500KΩ
Max input voltage: 80Vpp (by ×1 probe)
Coupling: DCs
Trig modes: Auto, Normal, Single, None, Scan and Fit; Rising/Falling edge/level trigger; Trig level adjustable with indicator; Trig sensitivity adjustable with indicator.
Waveform Functions: Auto measurement: frequency, cycle time, duty cycle, peak voltage, RMS voltage, Average voltage and DC voltage; Precise vertical/horizontal measurement with markers; Hold/Run.
Signal Generator: 10Hz~1MHz square wave
Waveform storage: Micro SD card
PC connection via USB: as SD card reader
Upgrade: USB
Power supply: 500mAh 3.7V Lithium battery/ USB
Dimension (w/o probe) 91mm*62mm*13mm

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials.

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...