Loco Positioning Node - Indoor Positioning Device - BitCraze

Product overview

Part Number: Loco Positioning Node - Indoor Positioning Device

Manufacturer: BitCraze

Product Category: OTHER PARTS

Update Date: 2024-05-20

Description

The Loco Positioning Node is a versatile positioning device that can run either as an Anchor or Tag in a Loco Positioning system. The system measures the distance between Nodes and Tags, and from those distances the absolute position of objects carrying Tags can be calculated.

Detailed Information

For more information on the Loco Positioning System please see this Loco Positioning System page.

Specifications are based on the standard 2-way ranging mode.

Features

Supports Anchor, Tag or Sniffer mode
Can be used as a standalone system with some Nodes acting as Anchors and one or more nodes acting as Tags
Multiple powering options
On board MCU

Electrical specification

Based on the Decawave DWM1000 module
Implements IEEE 802.15.4 UWB
STM32F072 MCU (Cortex-M0, 48MHz, 16kb SRAM, 128kb flash)
High precision pressure sensor (LPS25H)
uUSB connector
Full speed USB device interface
Powered by USB, 6 mm barrel jack (5 – 12V) or screw terminal (5 – 12V)
FTDI debug port (not populated)
Serial connector compatible with ESP8266 module (not populated)
Power consumption 180 mA max

Ranging specification

Ranging accuracy ±10 cm according to DWM1000 spec. See the wiki for measurements.
Maximum tested range 10 m
Nr of anchors required: theoretical minimum of 4 for 3D positioning. More anchors adds redundancy and accuracy, up to 8 supported.

Radio specification

Operates at 3.2 – 7 GHz
Channel bandwidth 500 MHz

Mechanical specification

Weight: 13.3 g
Size (WxHxD): 65x40x13 mm
4 mounting holes for M3 screws

Compatibility

Works with the Loco Positioning Deck

Package contents

1 x Loco Positioning Node

Resources

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...