Product overview

Part Number
HolyBro M10 GPS Module (For Pix32 & Pixhawk 1 / 2.4.6 / 2.4.8)
Manufacturer
HolyBro
Product Category
OTHER PARTS
Update Date
2024-05-20

Description

Tired of your drone pulling a “Nemo” every time it flies? With the Holybro M10 GPS, it’ll be more like a GPS-armed James Bond—smooth, suave, and always knows where it’s at.

Detailed Information

Introducing the M10 GPS: the celestial chaperone that’s so multi-talented, it’s practically the Swiss Army knife of the GPS world. Powered by the u-blox M10 series, this device isn’t just smart; it’s a full-blown genius, simultaneously schmoozing with GPS, Galileo, GLONASS, and BeiDou. Yes, all four major GNSS constellations at once, because why settle for one when you can have them all?

But wait, there’s more! This isn’t your average, run-of-the-mill GPS. Oh no, it comes equipped with an IST8310 compass, a tricolored LED indicator to light up your life, a buzzer to keep you on your toes, and a safety switch because, well, safety first. With three different connector options, this device is like the ultimate party guest: versatile, adaptable, and always connected.

And let’s talk about speed and accuracy. The M10 GPS doesn’t just find your location; it practically teleports you there. Thanks to its high-gain 25 x 25 mm patch antenna, your position is pinpointed with the precision of a hawk spotting its prey. Plus, the omnidirectional antenna radiation pattern means you can install this bad boy just about anywhere and still get stellar results.

But that’s not all. This device comes with some serious backing in the form of required software: PX4 1.14, ArduPilot 4.3, INAV 5.0.0, and Betaflight 4.3.0 or newer. Talk about being in good company.

In the box, you’ll find not just a GPS module but a beacon of hope for all your navigation needs. So, whether you’re a drone enthusiast, a roboticist, or just someone who hates asking for directions, the M10 GPS is here to guide you. Fast, accurate, and unfailingly reliable – because getting lost is so last century.

Key Highlights:

  • Captain Jack Sparrow’s Compass: Features an IST8310 compass, so your drone always knows where its North Star is.

  • Sonic Booms & Happy Tunes: Comes with an internal buzzer and safety switch because safety and melody are our middle names.

  • Christmas in July: Ultra-bright UI RGB LED. It’s not just eye-candy; it’s eye-Christmas!

  • Fast & Furious Positioning: With the high-gain 25254mm antenna, your drone will know its place faster than Vin Diesel knows how to say “family.”

Technical Specifications:


Holybro M10 GPSHolybro M9N GPS
GNSS ReceiverUblox M10Ublox M9N
Number of Concurrent GNSSUp to 4 GNSSUp to 4 GNSS
BeiDouBeiDou
GalileoGalileo
GLONASSGLONASS
GPSGPS
QZSSQZSS
Frequency BandGPS L1GPS L1
Galileo E1Galileo E1
GLONASS L1GLONASS L1
BeiDou B1BeiDou B1
SBAS L1SBAS L1
QZSS L1QZSS L1
CompassIST8310IST8310
Output ProtocolUBX (U-blox)UBX (U-blox)
NMEANMEA
Accuracy2.0m CEP1.5m CEP
Nav. Update RateUp to 25 Hz (single GNSS),Up to 25 Hz (4 concerrent GNSS)
Up to 10 Hz (4 concurrent GNSS)
GNSS Augmentation SystemEGNOS, GAGAN, MSAS and WAASEGNOS, GAGAN, MSAS and WAAS
QZSS: L1SQZSS: L1S
Default Baud Rate115200115200
Input Voltage4.7-5.2V4.7-5.2V
Port TypeJST-GH-10PJST-GH-10P
Antenna25 x 25 x 4 mm ceramic patch antenna25 x 25 x 4 mm ceramic patch antenna
Power consumptionLess than 200mA @ 5VLess than 200mA @ 5V
Operating Temperature-40~80C-40~80C
Dimensionφ50 x14.4 mmφ50 x14.4 mm
Weight32g32g
Cable Length26cm (42cm cable purchase separately)26cm (42cm cable purchase separately)
OtherTri-color LEDTri-color LED
Onboard BuzzerOnboard Buzzer
Safety SwitchSafety Switch
LNA MAX2659ELT+ RF AmplifierLNA MAX2659ELT+ RF Amplifier
Rechargeable Farah capacitanceRechargeable Farah capacitance
Low noise 3.3V regulatorLow noise 3.3V regulator

Firmware Compatibility:

PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer are welcomed to this GPS party.

What’s in the Box:

1x M10 GPS Module
1x Fixed Carbon Fiber GPS mount

Compatibility

 for Pix32 & Pixhawk1/2.4.6/2.4.8 (Molex1.25mm 6pin & 4pin &3pin cable)

  • These connectors are for “Switch”, “GPS”, and “I2C” input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6/2.4.8

M10pinmap

Price & Procurement

Associated Product