Product overview
- Part Number
- Matek Micro BEC 5V/12V Adjustable 7-21V input
- Manufacturer
- Matek Systems
- Product Category
- OTHER PARTS
- Update Date
- 2024-05-20
Description
This is an adjustable BEC that can accept 6-21V output and convert it to a constant 5V, or 12V (default is 5V) output. This module is around the size of a micro-SD card, the output power can be changed between 5V and 9V via solder jumper pads. Ideal for powering things like your ESC, receivers, DJI Air unit or VTX. Rated at 1.5A this BEC will handle most things you need on your 4 or 5S quadcopter.Not suitable for 6S builds
Detailed Information
This is an adjustable BEC that can accept 6-21V input and convert it to a constant 5V, or 12V (default is 5V) output. Ideal for powering things like your ESC, receivers, DJI Air unit or VTX. Rated at 1.5A this BEC will handle most things you need on your quadcopter. This BEC is not suitable for 6S quadcopters.
Features
- High Efficiency Synchronous Step-down regulator
- Wide 6V to 21V Operating Input Range
- OCP Protection and Hiccup
- Thermal Shutdown
- Output Short-circuit tolerant (5 seconds/minute)
Specifications
- Brand name: Matek Systems
- Item name: Micro BEC
- Continuous load current: 1.5 Amps (Max.2.5A 5s/minute)
- VOut 5V or 12V Adj. Default is 5V.
- VOut Load Regulation: 2%
- Standby current: <5mA
- Maximum Duty Cycle: 95%
- Pins distance: 2.54mm
- Quantity: 1Pcs
- Size: 10x14x3mm
- Weight: 1g
Included
- 1x Bec Module
Price & Procurement
Associated Product
-
-
-
-
-
-
Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ... -
DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ... -
With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ... -
You May Also Be Interested In
Hyperlow Vert Freestyle Battery Plate
Hyperlow Vert Freestyle Bottom Plate
Hyperlow CG Camera Bumper (3mm)
Hyperlow CG Bottom Plate (3mm)
Chameleon Aluminum HD Cam Lever (1 piece)
Crusader GT2017 Bottom Plate
Soft Motor Damping System (anti vibration mount)
CrazyFlie 2.0 - BigQuad Deck
CrazyFlie Z-Ranger Deck
Plastic Camera Mount -Moskito 70 (FrSky)
Plastic Flight Controller Mount - Moskito 70
Tyrant S 215 Upper Plate (D1)
Tyrant S 215 Upper Plate (D2)
Rear Tower part for Crusader GT2 Series
Rubber Motor Grommets (Pack of 4)
Crusader GT2 Bottom Plate (150, 175, 200)
Crusader 165 Lower Main Frame
Crusader190/225 Lower Board
QAV-R Carbon Fiber Arm (4,5,6 inch)
Tyrant 180 Carbon Fibre Upper Deck Plate