Matek FCHUB-12S PDB w/ Curr 440A, 5V & 12V - Matek Systems

Product overview

Part Number: Matek FCHUB-12S PDB w/ Curr 440A, 5V & 12V

Manufacturer: Matek Systems

Product Category: OTHER PARTS

Update Date: 2024-05-20

Detailed Information

The Matek FCHUB-12S is a serious PDB designed for X class quadcopters. It has a 280A continuous current rating, with burst support to up to 440A which will provide full power to just about any motor you decide to throw on you drone. Aprart from that it packs everything else you love about Matek PDB’s, such as a current sensor, 3.3V, 5V and 12V Becs to power your other equipment. However this PDB also has a remote switchable 12V supply that can be used to turn your VTX on and off remotely.

Matek-FCHUB-12S-Manual

Specification:
Brand Name: Matek System
Model: FCHUB-12S

Mounting: 30.5 x 30.5mm (M3)

Dimensions: 55 x 50 x 6 mm

Weight: 21g

PDB:

Input Voltage: 8-60V (3-12S Lipo)

4x70A cont, 4x110A burst

4x ESC power /signal/ telemetry pads

Current Senor: 440A, 3.3V ADC, Scale 75

2x LED indicators for 5V, 12V

FFC connection

Compatible with MATEKSYS FC F405-STD, F722-STD

VTX: Video Transmitter signal

T5 & R5: TX5 and RX5 of F405-STD/F722-STD

BEC 5V output (5V pad)

Voltage: 5.0 +/- 0.1VDC

Continuous current 5 Amps, Max.6A

Short-circuit tolerant (2 seconds)

Overcurrent protection & self-recovery

BEC 12V output (12V pad)

Voltage: 12.0 +/- 0.2VDC (Input voltage >=12V)

Continuous current 4 Amps, Max.5A

Input voltage<12V, Output voltage = Input voltage

Probably there is audible sound in the BEC12V inductor when Input voltage<12V

Short-circuit tolerant (2 seconds)

Overcurrent protection & self-recovery

Switchable 12V output (SW12V pad)

12V ON/OFF can be switched via PINIO

can be use for powering VTX,LED etc.

BEC 3.3V output

Linear Regulator

Continuous current: 500mA

BEC 3.3V output

Linear Regulator

Continuous current: 500mA

Package Included:

1 x FCHUB-12S PDB Board

1 x Capacitor

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...