SucceX-D F7 V2.2 stack (F7+50A ESC) replaced by BLITZ F722 (F7 V1.1 + 55A 4in1 ESC)
New lightweight side panel design
Instead of XING 2806.5 motors, there are now XING2 2809 1250KV
It uses a 7.5- inch frame, compared to the 7-inch frame on the regular Chimera7.
LED battery charge indicator (iFlight logo at the bottom)
360° TPU protection, DJI camera and antenna mount protection
Availability of TPU mount for GoPro
Lightweight side panel design
The propellers are not captured by the camera lens
Availability of a GPS module on board for safety of long-distance flights
The design with solid 6mm beams provides high rigidity
Possibility of mounting the battery from the top or bottom
Weight: 695g (without battery and GoPro mounting plate)
Dimensions: 258 x 200 mm
Frame size: 321 mm
Distance from bottom to top: 20-29 mm
Thickness of chamber plate, upper, lower and middle plates: 3mm
Frame Configuration: DeadCat
Propellers: HQ 7.5x3.7x3
Beam thickness: 6mm
Power connector: XT60
Motors: XING2 2809 1250KV
Flight Controller: BLITZ F722
Speed controller (ESC): BLITZ E55 4-in-1 2 -6S ESC
Video transmitter: BLITZ Whoop 1.6W VTX
Recommended battery: 6S 4000mAh XT60

Assembled quadcopter iFlight Chimera7 Pro V2 Analog BNF 6S (PNP) 1250KV on a modern frame, with an analog video link.

See also the DJI O3 Digital Video Link version .

iFlight Chimera7 Pro LR is a super-efficient 7.5-inch long-range drone. It can carry large batteries. The quadcopter frame has increased rigidity, which reduces resonance to a minimum. A combination of XING2 2809 engines and 7-inch HQ propellers is responsible for good controllability.

Batteries can be mounted on top, but a larger battery can be installed on the bottom. We recommend 6S LiPo / Li-ion batteries with a capacity of 2500 mAh or more, or 5S LiPo / Li-ion batteries with a capacity of 3000 mAh or more for flights in cruising (slow) mode.

Equipped with a GPS receiver. You can configure Betaflight GPS Rescue (the manufacturer supplies it switched off).

What is the difference with the Pro version?

• SucceX-D F7 V2.2 stack (F7+50A ESC) replaced by BLITZ F722 (F7 V1.1 + 55A 4in1 ESC)

• New lightweight side panel design

• Instead of XING 2806.5 motors, there are now XING2 2809 1250KV

• It uses a 7.5-inch frame, compared to the 7-inch frame on the regular Chimera7.

Peculiarities

• LED battery charge indicator (iFlight logo at the bottom)

• 360° TPU protection, DJI camera and antenna mount protection

• Availability of TPU mount for GoPro

• Lightweight side panel design

• The propellers are not captured by the camera lens

• Availability of a GPS module on board for safety of long-distance flights

• The design with solid 6mm beams provides high rigidity

• Possibility of mounting the battery from the top or bottom

Characteristics

• Weight: 695g (without battery and GoPro mounting plate)

• Dimensions: 258 x 200 mm

• Frame size: 321 mm

• Distance from bottom to top: 20-29 mm

• Thickness of chamber plate, upper, lower and middle plates: 3mm

• Frame Configuration: DeadCat

• Propellers: HQ 7.5x3.7x3

• Beam thickness: 6mm

• Power connector: XT60

• Motors: XING2 2809 1250KV

• Flight Controller: BLITZ F722

• Speed controller (ESC): BLITZ E55 4-in-1 2-6S ESC

• Video transmitter: BLITZ Whoop 1.6W VTX

• Recommended battery: 6S 4000mAh XT60

The complete set, characteristics, layout, etc. may be changed by the manufacturer without additional notice. You can find up-to-date information on the  manufacturer's website