Hex Power Selection Module - Hex Technology

Product overview

Part Number: Hex Power Selection Module

Manufacturer: Hex Technology

Product Category: OTHER PARTS

Update Date: 2024-05-20

Description

This is a power selection module (PSM) that can be used if you are designing your own carrier board for the Cube Autopilot. Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully

Detailed Information

Power inputs must be between 4.4v and 5.7v Power output is the same voltage as the selected input. Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully. This module also holds the Buzzer controller. The Aux power input has a Zener clamping it to 5.6v, this zener is protected from continuous over voltages by a fuse and fet.

Price & Procurement

Associated Product

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...