Axis AirForce PRO X8 2.5″ Cinewhoop Frame - Axis Flying

This is the frame used on the Airforce Pro cinewhoop that can be used for spares or if you want to build your very own micro X8 cinewhoop.

This is the frame used on the Airforce Pro that can be used for spares or if you want to build your very own micro X8 cinewhoop.

This frame uses 20x20mm mounting hardware and supports either HD (Caddx Vista) or analog VTX.

This kit includes the carbon fibre frame, motor mounts, 8x Duct Mounts, screws, and LED boards.

STL 3D Print Files

You can print your own, or we can do it for you via our 3D Print service.

canopic jar 3d printing

Material: TPU Weight: up to 1g. Suitable for cameras: Caddx Ant lite, C ...
dipole antenna 5.8g ipex 7cm

Dipole antenna 5.8G ipex 7cm
dipole antenna 5.8g ipex 5cm

Dipole antenna 5.8G ipex 5cm
connector a30 male/female

A30 Male/Female Connector
canopy crux3

Weight: 1.2 g. Canopy for installing cameras: 14*14mm
battery GNB 300mah 1s 60c hv

Capacity: 300 mAh Nominal voltage: 3.8 V Maximum discharge current: 60C ...
GEPRC DarkStar20 O3 ELRS Cinewhoop Quadcopter

DarkStar20: So light, it makes feathers look overweight. Perfect for sneaking th ...
CrazyF411 ELRS AIO Toothpick Flight Controller (20A)

With 20A Blheli_s ESCs and an integrated ELRS RX, this FC lifts your drone’s per ...
Tiny1-C

256×192/160×120 Micro Thermal Camera. Tiny1-C is a long-wave (8~14μm) thermal ca ...

40mm-2 1610 (1.5mm 8pcs) 40mm-3 1608 (1mm 8pcs) 40mm-2 1610 (1mm 8pcs) SpeedX2 2105.5 2650Kv SpeedX2 2105.5 2650Kv-M5 Datura 2105.5 3650Kv GTS V3 2105 Plus 2950Kv GTS V3 2104 Plus 3000Kv 2006 2030Kv F2004 1700Kv Eco II 2004 3000KV Mamba TOKA 2004 1700Kv Mamba TOKA 2004 2900KV Koko 2004 1800Kv Koko 2004 2900Kv Mamba TOKA 1408 2900Kv Datura 1507 2750Kv SmooX 1507 Plus 3800Kv P1804 2400Kv P1804 3400Kv