A large number of connectors, facilitating quick connection to the setup. All signal and power lines are also duplicated in an extended set of contact pads for those who like to solder and connect a large number of peripherals.
6-layer PCB with single-side component layout and ESC interference protection.
The impact-resistant case protects the controller components from dust and grass, but is easy to open for access to the board.
Supports RGB LED lighting with WS2812 controller.
Processor: STM32 F722 RET6 at 216 MHz
Target firmware: RUSH_BLADE_F7
Gyro sensor: ICM42688P , low noise power supply
Barometer: BMP280
Blackbox: 16 MB of built-in flash memory
OSD: AT7456E CVBS
Power: 7-36V / 3-6S LIPO
Port: 8× PWM 5× UART 1× I2C
BEC stabilizers: 5V 3A
Analog inputs: V-BATT (battery voltage) / CURR-ESC (current sensor)
Mount: 30.5×30.5 mm
Dimensions: 36.5×37×5.2 mm
Weight: 11g (without wires)

Flight Controller RUSH BLADE F722 30x30 Analog V2

Peculiarities

• A large number of connectors, facilitating quick connection to the setup. All signal and power lines are also duplicated in an extended set of contact pads for those who like to solder and connect a large number of peripherals.
• 6-layer PCB with single-side component layout and ESC interference protection.
• The impact-resistant case protects the controller components from dust and grass, but is easy to open for access to the board.
• Supports RGB LED lighting with WS2812 controller.

Characteristics

• Processor: STM32 F722 RET6 at 216 MHz
• Target firmware: RUSH_BLADE_F7
• Gyro sensor: ICM42688P , low noise power supply
• Barometer: BMP280
• Blackbox: 16 MB of built-in flash memory
• OSD: AT7456E CVBS
• Power: 7-36V / 3-6S LIPO
• Port: 8× PWM 5× UART 1× I2C
• BEC stabilizers: 5V 3A
• Analog inputs: V-BATT (battery voltage) / CURR-ESC (current sensor)
• Mount: 30.5×30.5 mm
• Dimensions: 36.5×37×5.2 mm
• Weight: 11g (without wires)

The complete set, characteristics, layout, etc. may be changed by the manufacturer without additional notice. You can find up-to-date information on  the manufacturer's website.